Menu
Your Cart

We are not operational yet. This site is currently under construction. Please check back after a while. For any queries, write to us at [email protected] 

Neodymium Ring Magnet 11 (OD) x 5 (ID) x 5 (Thick), N35, 1.5Kg Pull

Neodymium Ring Magnet 11 (OD) x 5 (ID) x 5 (Thick), N35, 1.5Kg Pull
Neodymium Ring Magnet 11 (OD) x 5 (ID) x 5 (Thick), N35, 1.5Kg Pull
Neodymium Ring Magnet 11 (OD) x 5 (ID) x 5 (Thick), N35, 1.5Kg Pull
Neodymium Ring Magnet 11 (OD) x 5 (ID) x 5 (Thick), N35, 1.5Kg Pull
Neodymium Ring Magnet 11 (OD) x 5 (ID) x 5 (Thick), N35, 1.5Kg Pull
₹​ 35.40
(₹​ 30.00 + GST)
B2B GST Credit Available

Neodymium Ring Magnet 11 (OD) x 5 (ID) x 5 (Thick), N35, 1.5Kg Pull, Magnetized through Thickness

  • This product is an Annular Ring shape Neodymium Magnet with Dimension 11 mm x 5 mm x 5 mm (Outer Diameter x Inner Dia x Thickness).
  • Neodymium Magnets are a member of the Rare Earth magnet family, and are the most permanent magnets in the world. They’re composed of Neodymium (Nd), Iron (Fe) and Boron (B), which makes them vulnerable to rust if they’re exposed to the elements.
  • To protect the magnet from corrosion and to strengthen the brittle magnet material, the magnet is usually coated with nickel. 
  • The NORTH pole is on one circular face and the SOUTH pole is on the opposite face.
  • Neodymium magnets have a high resistance to demagnetization. They will not lose their magnetization around other magnets or if dropped.

 

  • Shape Disc
    Magnetic Face 11 mm Outer Diameter, 5 mm Inner
    Thickness 5 mm
    Grade N35
    Plating Ni (Nickel)
    Material NdFeB
    Magnetization Direction Through the thickness
    Vertical Pull (Kg) 1.5 approx
    Slide Resistance (Kg) 0.3
    Max Temp (°C) 80
     

 

 

 

 

 

 

 

 

These magnets will have approximately 1400 Gauss on each face. Each magnet can support a steel weight of up to 1.5kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also support up to 0.33kgs in a shear position before beginning to slide down a steel surface under the same conditions. These magnets can be fixed in place using Araldite/Loctite and have a maximum operating temperature of 80 degrees C.

PS - All Units are in Millimeter (MM) unless otherwise specified.

Write a review

Please login or register to review