Menu
Your Cart
Our order fulfillment operations will remain suspended on 29th and 30th March 2024 for FY Closing. Any order placed after 2 PM on 28th March will be shipped on 1st April 2024. 

2.8inch Touch Display Module for Raspberry Pi Pico, 262K Colors, 320×240, SPI

2.8inch Touch Display Module for Raspberry Pi Pico, 262K Colors, 320×240, SPI
2.8inch Touch Display Module for Raspberry Pi Pico, 262K Colors, 320×240, SPI
2.8inch Touch Display Module for Raspberry Pi Pico, 262K Colors, 320×240, SPI
2.8inch Touch Display Module for Raspberry Pi Pico, 262K Colors, 320×240, SPI
2.8inch Touch Display Module for Raspberry Pi Pico, 262K Colors, 320×240, SPI
2.8inch Touch Display Module for Raspberry Pi Pico, 262K Colors, 320×240, SPI
2.8inch Touch Display Module for Raspberry Pi Pico, 262K Colors, 320×240, SPI
2.8inch Touch Display Module for Raspberry Pi Pico, 262K Colors, 320×240, SPI
2.8inch Touch Display Module for Raspberry Pi Pico, 262K Colors, 320×240, SPI
2.8inch Touch Display Module for Raspberry Pi Pico, 262K Colors, 320×240, SPI
WaveShare Electronics
2.8inch Touch Display Module for Raspberry Pi Pico, 262K Colors, 320×240, SPI
₹​1,420.72
₹​1,204.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 10
B2B GST Credit Available
Price in reward points: 1024

The built-in controller used by this LCD is ST7789VW, which is an LCD controller with 240 x RGB x 320 pixels, while the pixels of this LCD itself are 240 (H) RGB x 320 (V), and the internal RAM of the LCD has been fully used. The LCD supports 16-bit or 18-bit input color formats per pixel, namely RGB565, and RGB666. The test demo uses RGB565 color format, which is a commonly used RGB format. LCD uses a four-wire SPI communication interface, which can greatly save GPIO ports, At the same time, the communication speed will be faster. The maximum SPI write speed tested is 60MHz.


Features

  • 320 × 240 resolution, IPS screen, 262K RGB, clear and colorful displaying effect.
  • Dedicated touch controller, bringing more smooth touching effect than AD-controlled solutions.
  • MicroSD card slot for storing images and direct displaying them easily.
  • Programmable backlight control, power saving.
  • Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples).


Specifications

OPERATING VOLTAGE5VRESOLUTION320×240 pixels
COMMUNICATION INTERFACESPIDISPLAY SIZE57.60 × 43.20 mm
DISPLAY PANELIPSPIXEL SIZE0.18 × 0.18 mm
DRIVERST7789DIMENSIONS70.20 × 50.20 mm
TOUCH CONTROLLERXPT2046  



Resources

User Guide


Onboard Peripherals


  1. Rapsberry Pi Pico header
  2. MicroSD card slot
  1. XPT2046
    resistive touch controller
  2. RT9193-33
    3.3V linear voltage regulator
  3. Pico reset button


Compatibility

Write a review

Note: HTML is not translated!
Bad Good
Captcha