Menu
Your Cart

2.13inch 250x122 E-Ink display HAT for Raspberry Pi, three-color Red/Black/White

2.13inch 250x122 E-Ink display HAT for Raspberry Pi, three-color Red/Black/White
2.13inch 250x122 E-Ink display HAT for Raspberry Pi, three-color Red/Black/White
2.13inch 250x122 E-Ink display HAT for Raspberry Pi, three-color Red/Black/White
2.13inch 250x122 E-Ink display HAT for Raspberry Pi, three-color Red/Black/White
2.13inch 250x122 E-Ink display HAT for Raspberry Pi, three-color Red/Black/White
2.13inch 250x122 E-Ink display HAT for Raspberry Pi, three-color Red/Black/White
2.13inch 250x122 E-Ink display HAT for Raspberry Pi, three-color Red/Black/White
2.13inch 250x122 E-Ink display HAT for Raspberry Pi, three-color Red/Black/White
WaveShare Electronics
2.13inch 250x122 E-Ink display HAT for Raspberry Pi, three-color Red/Black/White
₹​1,414.82
₹​1,199.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout

B2B GST Credit Available

2.13inch 250x122 E-Ink display HAT for Raspberry Pi, three-color Red/Black/White


This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.


Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


Features

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)


Technical Specs

Operating voltage: 3.3V/5V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 65mm × 30.2mm
Display size: 23.71mm × 48.55mm
Dot pitch: 0.229 × 0.228
Resolution: 250 x 122
Display color: red, black, white
Grey level: 2
Full refresh time: 15s
Refresh power: 26.4mW(typ.)
Standby power: <0.017mW
Viewing angle: >170°


Resources

www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(B)


2.13inch e-Paper HAT (B) dimensions

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: Epaper , Eink , SPI , Waveshare