Menu
Your Cart

2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi

2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi
WaveShare Electronics
2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi
₹​4,106.00
₹​3,479.66 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 43
B2B GST Credit Available
Price in reward points: 4283

 

Introduction

This is a 2-Channel CAN bus expansion HAT designed for Raspberry Pi, supports CAN FD (CAN with Flexible Data-Rate), the speed is higher than the traditional 1Mbps of CAN2.0, features multi onboard protection circuits, high anti-interference capability, and stable operation. It suits for fields such as automotive devices or industrial automation.

Features

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • Supports both traditional CAN2.0 and CAN FD protocols, up to 8Mbps data rate
  • Breakout SPI control pins, for connecting with host control boards like STM32/Arduino
  • Onboard electrical isolation, up to 5KV isolated voltage, high anti-interference capability, stable operation
  • Onboard lighting proof, ESD, short circuit protection, more safe communication
  • Onboard voltage translator, select 3.3V/5V operating voltage by jumper
  • Onboard 120Ω terminal resistor, configured by jumper
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino)

Specifications

  • CAN controller: MCP2517FD
  • CAN transceiver: MCP2562FD
  • Communication interface: SPI (two channels independent SPI by default, swith to one channel SPI by soldering)
  • Power supply: external power input terminal, or Raspberry Pi
  • Power input terminal voltage: DC 8~26V
  • Operating voltage: 5V
  • Logic level: 3.3V/5V
  • Dimensions: 65.0 x 56.5 mm

Interfaces

CAN interface
PINRaspberry Pi (BCM2835)Raspberry Pi (WPI)Description
5V5V5V5V Power input
GNDGNDGNDGround
MISO_09 (MISO)13 (MISO)SPI_0 Data output
MOSI_010 (MOSI)12(MOSI)SPI_0 Data input
SCK_011 (SCK)14 (SCK)SPI_0 Clock input
CS_08 (CE0)10 (CE0)CAN_0 Chip select
INT_0256CAN_0 Interrupt Pin
MISO_19/19 (MISO)13/24 (MISO)SPI_1 Data output
MOSI_110/20 (MOSI)12/28 (MOSI)SPI_1 Data input
SCK_111/21(SCLK)14/29 (SCLK)SPI_1 Clock input
CS_17(CE1)/2611(CE1)/25CAN_1 Chip select
INT_11627CAN_1 Interrupt Pin
 

 


Development Resource - Product Wiki Page for Resources


2-CH CAN FD HAT on board resource

  1. 1. CP2517FD CAN controller
  2. 2. MCP2562FD CAN transceiver
  3. 3. SI8642ED digital isolator
  4. 4. MP1584EN power chip
  5. 5. RT9193-33 power chip
  6. 6. B0505LS-1W power supply isolation module
  7. 7. Raspberry Pi GPIO connector: for connecting Raspberry Pi
  8. 8. CAN terminal
  9. 9. External power input terminal: DC 8~26V input
  10. 10. MCU control pin: for connecting with host control boards like Arduino
  11. 11. 120Ω terminal resistor configuration
  12. 12. 3.3V/5V logic level selection
  13. 13. CAN operating mode selection:
    1. A: CAN_0 and CAN_1 use two channels independent SPI (default)
    2. B: CAN_0 and CAN_1 share one common SPI
  14. 14. Power indicator
  15. 15. 2A fast auto-recovery fuse
  16. 16. Power supply anti-reverse diode
  17. 17. Power supply anti-countercurrent diode
  18. 18. Follow current diode
  19. 19. SM24CANB TVS diode array

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: CAN , RS485 , Raspberry Pi , HAT