Menu
Your Cart

We are not operational yet. This site is currently under construction. Please check back after a while. For any queries, write to us at [email protected] 

2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI

2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
₹​929.00
GST & Shipping Calculated at Checkout
B2B GST Credit Available

2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI

This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.

  • → Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • → Optional interfaces: SPI (default), or I2C, configured via onboard resistor
  • → Brings control pins for host boards like Arduino/STM32
  • → Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • → Driver: SSD1305
  • → Interface: SPI / I2C
  • → Display size: 2.23inch diagonal
  • → Display color: white
  • → Resolution: 128×32
  • → Viewing angle: >160°
  • → Power supply voltage: 3.3V/5V
  • → Logic level: 3.3V

Development Resources - 

https://www.waveshare.com/wiki/2.23inch_OLED_HAT

 


2.23inch OLED HAT dimensions

Write a review

Please login or register to review