Menu
Your Cart
Our order fulfillment operations will remain suspended on 29th and 30th March 2024 for FY Closing. Any order placed after 2 PM on 28th March will be shipped on 1st April 2024. 

3.52inch e-Paper HAT, 360 × 240, SPI Interface

3.52inch e-Paper HAT, 360 × 240, SPI Interface
3.52inch e-Paper HAT, 360 × 240, SPI Interface
3.52inch e-Paper HAT, 360 × 240, SPI Interface
3.52inch e-Paper HAT, 360 × 240, SPI Interface
3.52inch e-Paper HAT, 360 × 240, SPI Interface
3.52inch e-Paper HAT, 360 × 240, SPI Interface
3.52inch e-Paper HAT, 360 × 240, SPI Interface
3.52inch e-Paper HAT, 360 × 240, SPI Interface
3.52inch e-Paper HAT, 360 × 240, SPI Interface
3.52inch e-Paper HAT, 360 × 240, SPI Interface
WaveShare Electronics
3.52inch e-Paper HAT, 360 × 240, SPI Interface
₹​1,944.64
₹​1,648.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 16
B2B GST Credit Available

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.

E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.


Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)


Specifications

OPERATING VOLTAGE3.3V/5VDISPLAY COLORBlack/White
INTERFACE3-wire SPI, 4-wire SPIGREY SCALE2
OUTLINE DIMENSIONS86.5 × 57mmFULL REFRESH TIME1.5s
DISPLAY SIZE74.51 × 49.67mmREFRESH POWER<25mW (typ.)
DOT PITCH0.207 × 0.207mmSTANDBY CURRENT<0.01uA (almost none)
RESOLUTION360×240 pixelsVIEWING ANGLE>170°


Pinouts

GNDGround
DINSPI MOSI pin
CLKSPI SCK pin
CSSPI chip selection, low active
DCData/Command selection (high for data, low for command)
RSTExternal reset, low active
BUSYBusy status output pin


Resources
User Manual

Write a review

Note: HTML is not translated!
Bad Good
Captcha