Menu
Your Cart
Our order fulfillment operations will remain suspended on 29th and 30th March 2024 for FY Closing. Any order placed after 2 PM on 28th March will be shipped on 1st April 2024. 

640x384 7.5inch E-Ink display HAT for Raspberry Pi, yellow / black / white three-color

640x384 7.5inch E-Ink display HAT for Raspberry Pi, yellow / black / white three-color
640x384 7.5inch E-Ink display HAT for Raspberry Pi, yellow / black / white three-color
640x384 7.5inch E-Ink display HAT for Raspberry Pi, yellow / black / white three-color
640x384 7.5inch E-Ink display HAT for Raspberry Pi, yellow / black / white three-color
640x384 7.5inch E-Ink display HAT for Raspberry Pi, yellow / black / white three-color
640x384 7.5inch E-Ink display HAT for Raspberry Pi, yellow / black / white three-color
WaveShare Electronics
640x384 7.5inch E-Ink display HAT for Raspberry Pi, yellow / black / white three-color
₹​5,367.82
₹​4,549.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout

B2B GST Credit Available

640x384 7.5inch E-Ink display HAT for Raspberry Pi, yellow / black / white three-color

This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

  • Operating voltage: 3.3V~5V
  • Interface: SPI
  • Outline dimension: 170.2mm × 111.2mm
  • Display size: 163.2mm × 97.92mm
  • Dot pitch: 0.255 × 0.255
  • Resolution: 640 × 384
  • Display color: yellow, black, white
  • Grey level: 2
  • Full refresh time: 16s
  • Refresh power: 38mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

SYMBOLDESCRIPTION
VCC3.3V~5V
GNDGround
DINSPI MOSI pin
CLKSPI SCK pin
CSSPI chip selection, low active
DCData/Command selection (high for data, low for command)
RSTExternal reset, low active
BUSYBusy status output, low active

7.5inch e-Paper HAT dimensions

Write a review

Note: HTML is not translated!
Bad Good
Captcha