RP2040-Plus, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, Onboard 16MB Flash Memory - With Soldered Pinheader

RP2040-Plus, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, Onboard 16MB Flash Memory - With Soldered Pinheader

This is an RP2040 MCU Board, a Pico-like MCU Board. The RP2040-Plus MCU board based on RP2040 Dual-Core Arm Cortex M0+ processor running up to 133 MHz. it features an onboard 16MB Flash, USB-C connector, recharge header, and higher current DC-DC chip.

User Manual / Datasheet / Example Codes Etc.

Specifications

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom.
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz.
• 264KB of SRAM, and 16MB Flash memory.
• USB-C connector, keeps it up to date, easier to use.
• Lithium battery recharge/discharge header, suitable for mobile devices.
• Onboard DC-DC chip TPS63000, high-efficiency DC-DC buck-boost chip, 1.8A current switch.
• The castellated module allows soldering directly to carrier boards.
• USB 1.1 with device and host support.
• Low-power sleep and dormant modes.
• Drag-and-drop programming using mass storage over USB.
• 26 × multi-function GPIO pins.
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.
• Accurate clock and timer on-chip.
• Temperature sensor
• Accelerated floating-point libraries on-chip.
• 8 × Programmable I/O (PIO) state machines for custom peripheral support.

RP2040 MCU Board 16MB Flash Memory - solder Version

Dual-Core Arm Processor

Dual-Core Arm Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz

26 × Multi-Function GPIO Pins

Configurable Pin Function, Allows Flexible Development And Integration

Outline Dimensions