Menu
Your Cart

ACS714ELCTR-20A-T Current Sensor 20A 1 Channel Hall Effect, Open Loop Bidirectional SOIC-8

ACS714ELCTR-20A-T Current Sensor 20A 1 Channel Hall Effect, Open Loop Bidirectional SOIC-8
Allegro Microsystems
ACS714ELCTR-20A-T Current Sensor 20A 1 Channel Hall Effect, Open Loop Bidirectional SOIC-8
₹​236.00
₹​200.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 2
B2B GST Credit Available
Price in reward points: 200

ACS714ELCTR-20A-T Current Sensor 20A 1 Channel Hall Effect, Open Loop Bidirectional SOIC-8


Datasheet


The Allegro™ ACS714 provides economical and precise solutions for AC or DC current sensing in automotive systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switch-mode power supplies, and overcurrent fault protection.

The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging.

The output of the device has a positive slope (>VIOUT(Q)) when an increasing current flows through the primary copper conduction path (from pins 1 and 2, to pins 3 and 4), which is the path used for current sampling. The internal resistance of this conductive path is 1.2 mΩ typical, providing low power loss. The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the signal leads (pins 5 through 8). This allows the ACS714 to be used with standard lead (Pb) free printed circuit board assembly processes. Internally, the device is Pb-free, except for flip-chip high-temperature Pb‑based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory.



Write a review

Note: HTML is not translated!
Bad Good
Captcha