Menu
Your Cart

PADI IoT Stamp - RTL8710 WiFi SoC - Assembled with Breadboard adapter

PADI IoT Stamp - RTL8710 WiFi SoC - Assembled with Breadboard adapter
PADI IoT Stamp - RTL8710 WiFi SoC - Assembled with Breadboard adapter
₹​513.3
₹​435.0 + 18% GST
All Inclusive, Shipping Calculated at Checkout

B2B GST Credit Available

PADI IoT Stamp - RTL8710 WiFi SoC - Assembled with Breadboard adapter

PADI IoT Stamp is a highly integrated, single-chip, low power WiFi controller with built-in antenna. The stamp combines an ARM Cortex M3, integrated Flash and RAM, WLAN MAC, WLAN baseband, RF balun, PA, LNA receiver, saw filter and power management module. Designs for makers with high speed SPI/I2C/UART interfaces for IoT applications with minimum Printed Circuit Board (PCB) area requirement. The PADI IoT Stamp is even smaller than a US stamp size.

Links 



Specifications  
Wireless

WiFi Standard:

Frequency Range:

802.11 b/g/n

2.4 GHz - 2.5 GHz (2400 MHz - 2483.5 MHz)

Hardware

SoC :

CPU :

ROM / RAM / FLASH :

SPI :

UART :

PWM :

I2C :

GPIO :

Operating Voltage :

Operating Temperature :

Dimension :

Wireless Network Mode :

Realtek RTL8710AF

ARM Cortex M3 (83 MHz)

1MB / 512KB / 1MB

Up to 1 (41.5 Mbps)

Up to 3 (2 x 4 Mbps + 1 x 38400 bps)

Up to 4

Up to 1 (3.4 Mbps)

Up to 19 (including 10 GPIO_INT)

3.0 V ~ 3.6 V (recommended 3.3 V)

-20 ℃ ~ 85 ℃

24 mm x 16 mm x 0.8 mm

Station / SoftAP / SoftAP + Station

Software

Bitrate :

Hash :

Security Standard :

Encryption :

Firmware Update :

OS :

Development Tools:

Network Protocol :

User Configuration :

802.11b : 11 Mbps , 802.11g : 54 Mbps , 802.11n : 150 Mbps

MD5 / SHA / HMAC-SHA

WPA / WPA2

WEP / TKIP / AES

UART / OTA / JTAG

FreeRTOS, ARM® mbed™ (future planning)

IAR, openOCD, J-Link

TCP / UDP / HTTP / FTP

AT Commands, Cloud Server, Android / iOS APP

Write a review

Note: HTML is not translated!
Bad Good