Menu
Your Cart

5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface

5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
WaveShare Electronics
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
₹​2,699.00
₹​2,287.29 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 23
B2B GST Credit Available
Price in reward points: 2287

5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface


This is an 5.79inch E-Paper Module , e-ink display, 792x272, Black/White, SPI Interface. The 5.79-inch E-Paper Module , a sophisticated electronic paper display that combines innovation and versatility for a wide array of applications. Boasting a resolution of 792x272 pixels, this module delivers crisp and clear visuals, ensuring a captivating viewing experience.





Features

    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Series/Arduino/STM32, etc.
    • Onboard voltage translator, compatible with 3.3V/5V MCUs
    • Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/Arduino/STM32)

    Specifications

      • OPERATING VOLTAGE : 3.3V
      • DISPLAY COLOR : Black/White
      • INTERFACE : 3-wire SPI, 4-wire SPI
      • GREY SCALE : 4
      • OUTLINE DIMENSIONS : 152.50 × 58.50mm
      • FULL REFRESH TIME : 3.5s
      • DISPLAY SIZE : 139.00 × 47.74mm
      • PARTIAL REFRESH TIME : 0.8s
      • REFRESH POWER : <50mW
      • DOT PITCH : 0.1755 × 0.1755mm
      • STANDBY CURRENT : <0.01uA (almost none)
      • RESOLUTION : 792 × 272 pixels
      • VIEWING ANGLE : >170°

      Package Includes

        • 5.79inch e-Paper Module  x1
        • GH1.25 9PIN cable 20cm x1




        Onboard SPI Control Interface

          • PWR : Power on/off control
          • BUSY : Busy status output pin
          • RST : External reset, low active
          • DC : Data/Command selection (high for data, low for command)
          • CS : SPI chip selection, low active
          • CLK : SPI SCK pin
          • DIN : SPI MOSI pin
          • GND : Ground
          • VCC : Power (3.3V / 5V input)


          Onboard Voltage Translator


          Dimensions


          Write a review

          Note: HTML is not translated!
          Bad Good
          Captcha