Menu
Your Cart

7.5inch e-Paper, E-ink display (H), 800x480, Red/Yellow/Black/White, SPI Interface

7.5inch e-Paper, E-ink display (H), 800x480, Red/Yellow/Black/White, SPI Interface
7.5inch e-Paper, E-ink display (H), 800x480, Red/Yellow/Black/White, SPI Interface
7.5inch e-Paper, E-ink display (H), 800x480, Red/Yellow/Black/White, SPI Interface
7.5inch e-Paper, E-ink display (H), 800x480, Red/Yellow/Black/White, SPI Interface
7.5inch e-Paper, E-ink display (H), 800x480, Red/Yellow/Black/White, SPI Interface
7.5inch e-Paper, E-ink display (H), 800x480, Red/Yellow/Black/White, SPI Interface
7.5inch e-Paper, E-ink display (H), 800x480, Red/Yellow/Black/White, SPI Interface
7.5inch e-Paper, E-ink display (H), 800x480, Red/Yellow/Black/White, SPI Interface
WaveShare Electronics
7.5inch e-Paper, E-ink display (H), 800x480, Red/Yellow/Black/White, SPI Interface

This product qualifies for Free Surface Shipping !

All orders with value above 1999+GST are eligible for free delivery in Surface mode. (Not applicable for B2B offline orders)
₹​4,679.00
₹​3,965.25 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 39
B2B GST Credit Available
Price in reward points: 3961

7.5inch e-Paper display (H), E-ink display, 800x480, Red/Yellow/Black/White, SPI Interface


User Manual / Datasheet / Example Codes Etc.


Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with online development resources and manual (e-Paper Driver HAT circuit diagram, examples for Raspberry Pi / Jetson Nano / Arduino / STM32)
  • Optional for e-Paper Driver HAT:
    • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano
    • Adapting SPI interface for connecting with controller boards like Raspberry Pi / Jetson Nano / Arduino / STM32, etc.
    • Onboard voltage translator, compatible with 3.3V / 5V MCUs


Package Contents

  1. 7.5inch e-Paper HAT (H) x1


Specifications

operating voltageRaw display: 3.3Vdisplay colorRed/Yellow/Black/White
with driver board: 3.3V/5V
interface3-wire SPI, 4-wire SPIgrey scale2
outline dimensionsRaw display: 170.20 × 111.20 × 1.20 (mm)full refresh time22s
driver board: 65.00 × 30.50 (mm)
display size163.20 × 97.92 (mm)refresh power<80mW
DOT PITCH0.204 × 0.204 (mm)standby current<0.01uA (almost none)
RESOLUTION800 × 480 pixelsviewing angle>170°


Dimensions

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: E-paper , Display