B2B GST Credit Available
- Stock: 0 in Stock
- SKU: 08866
- Delivery Time
- Bulk & B2B RFQ
7Semi Amass XT60 Smoke Stopper Short Circuit Tester
The 7Semi Amass XT60 Smoke Stopper is a compact protection and circuit-testing module designed for the first power-up of FPV drones, RC vehicles, robotics systems, and other battery-powered electronics. Installed between an XT60-equipped battery and the device under test, it limits fault current during short circuits and wiring mistakes, helping reduce the risk of damage to ESCs, flight controllers, receivers, power-distribution boards, and other connected electronics.
The module uses two resettable PPTC protection devices rated at 0.5A and 1.1A and automatically recovers after an overcurrent condition is removed and the protection devices cool down. Integrated PWR and ERR LEDs provide visual operating and fault indication, while XT60 male and female connectors enable plug-and-play connection without additional wiring. The module operates from 3–33V DC and is specified for 3S–6S LiPo battery systems.
Features
- First Power-Up Protection: Helps protect newly assembled electronics during initial battery connection
- Short-Circuit Protection: Limits current during wiring faults and accidental short circuits
- Dual PPTC Protection: Integrates 0.5A and 1.1A resettable PPTC protection devices
- Automatic Reset: PPTC devices recover after the fault is removed and they cool down
- Reverse-Polarity Protection: Helps reduce the risk of damage from incorrect battery connection
- Wide DC Input Range: Supports 3–33V DC operation
- LiPo Compatibility: Designed for 3S–6S LiPo battery systems
- Power Indicator: PWR LED provides visual power-status indication
- Fault Indicator: ERR LED helps identify abnormal connection conditions
- XT60 Connectivity: Integrated XT60 male and XT60 female connectors
- Plug-and-Play Design: Installs directly between the battery and device under test
- No Disposable Fuse: Resettable PPTCs eliminate routine fuse replacement after recoverable overcurrent events
- Wide Temperature Range: Operates from -40 C to +75 C
- Compact Construction: 48.0 × 14.0 × 23.56 mm form factor
Specifications
- Category of Product: Fuse Protection Module
- Operating Voltage: 3V - 33V DC
- Operational Temperature in C: -40C to 75C
- Fuse Current Rating: 0.5A & 1.1A
- Battery Supported: 3S - 6S LiPo battery
- Dimension in mm: 48mmx14mmx23.56mm
Applications
- FPV drone first power-up
- RC aircraft testing
- RC car electronics
- Flight-controller installation
- ESC and motor-system testing
- Power-distribution board testing
- Robotics development
- Custom LiPo-powered electronics
- Wiring fault diagnosis
- Prototype power testing
- DIY electronics
- Battery-powered embedded systems
Package Includes
- 1x 7Semi Amass XT60 Smoke Stopper Short Circuit Tester
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)
