







B2B GST Credit Available
- Stock: 0 in Stock
- SKU: 09127
- Delivery Time
- Bulk & B2B RFQ
7Semi SHT45 Temperature and Humidity Sensor Breakout with Qwiic Connector
The 7Semi SHT45 Tiny Temperature and Humidity Sensor Board with Qwiic Connector is a compact, high-accuracy environmental sensing module designed for precise temperature and relative humidity monitoring. Featuring the Sensirion SHT45 sensor, it delivers 16-bit digital measurements through an I2C interface.
The sensor provides +/-0.1 deg C typical temperature accuracy and +/-1.0% RH typical humidity accuracy. It supports temperature measurements from -40 to +125 deg C and relative humidity measurements from 0 to 100% RH, making it suitable for environmental monitoring, smart home automation, HVAC systems, and IoT applications.
The board operates from a nominal 3.3V supply and features a 4-pin Qwiic connector with 1.00mm pitch for easy integration with compatible development boards. Its narrow-neck PCB design helps reduce thermal interference from connected electronics, improving measurement reliability.
With ultra-low power consumption, a fixed I2C address of 0x44, and an integrated heater with three selectable power levels, the module is suitable for compact, portable, and battery-powered sensing applications.
Features
- High-Accuracy Temperature Measurement: Provides +/-0.1 deg C typical temperature accuracy for precise environmental monitoring.
- High-Accuracy Humidity Measurement: Offers +/-1.0% RH typical accuracy for reliable relative humidity sensing.
- Wide Measurement Range: Supports temperature measurements from -40 to +125 deg C and relative humidity measurements from 0 to 100% RH.
- 16-Bit Digital Output: Provides temperature and humidity measurements through an I2C interface.
- Ultra-Low Power Consumption: Supports an average sensor current of 0.4 uA typical at 1 measurement per second in low-repeatability mode with the heater disabled.
- Qwiic Connector Interface: Features a 4-pin, 1.0mm pitch Qwiic connector for easy connection to compatible development boards without soldering.
- I2C Communication Interface: Uses a fixed 7-bit I2C address of 0x44 for communication with compatible microcontrollers.
- Integrated Sensor Heater: Features three selectable heating power levels (Low, Medium, High) for sensor recovery in challenging humidity conditions.
- Compact Tiny Board Design: Features a narrow-neck PCB layout that helps minimize heat transfer to the sensing element.
- 3.3V Operation: Designed for a nominal 3.3V power supply.
- Reliable Digital Communication: Supports CRC-8 checksum verification for measurement data.
- Versatile Applications: Suitable for IoT devices, HVAC systems, environmental monitoring, smart home automation, and portable instruments.
Specifications
- Sensor IC: Sensirion SHT45
- Communication Interface: I2C
- I2C Address: 0x44
- Supply Voltage: 1.08V to 3.6V DC
- Temperature Accuracy: +/-0.1 deg C typical (20 to 60 C)
- Humidity Measurement Range: +/-0.1 deg C typical
- Humidity Accuracy: +/-1.0% RH typical (25 to 75% RH)
- Digital Resolution: 16-bit
- Integrated Heater: Yes, 3 selectable heating levels (Low, Medium, High)
- Connector Type: 4-pin Qwiic
- Approximate Dimensions (L x W x H): 19 x 7 x 2.81 mm
- Operating Temperature: -40 C to +105 C
Product Includes
- 1x 7Semi SHT45 Temperature and Humidity Sensor Breakout with Qwiic Connector
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ short quantity/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
Unboxing video is mandatory to report damaged or short quantity of the items in the order.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)


