







This product qualifies for Free Surface Shipping !
B2B GST Credit Available
- Stock: 0 in Stock
- SKU: 09131
- Delivery Time
- Bulk & B2B RFQ
7Semi UCC14130 1.5W Isolated DC-DC Converter Board, 12V & 5V Outputs
The 7Semi UCC14130 Isolated DC-DC Converter Board is a compact power module built around the Texas Instruments UCC14130-Q1 isolated DC-DC converter IC. Designed to provide galvanically isolated power, it operates from a 10V to 18V DC input and delivers isolated 12V and 5V outputs with an output current rating of up to 120mA, making it suitable for gate-driver and industrial power applications.
The board features an integrated isolation transformer with over 3kV RMS isolation, helping reduce ground loops and electrical interference between input and output circuits. It incorporates spread-spectrum modulation for low electromagnetic emissions, soft-start functionality, and built-in undervoltage, overvoltage, short-circuit, power-limit, and thermal protection.
For convenient integration, the board includes screw terminals, a 2.54 mm-pitch connector interface, separate input (GNDP) and output (GNDS) grounds, and a PCB isolation slot. The converter is enabled by default and can be disabled by pulling the EN pin LOW, with a maximum EN input voltage of 5V.
The module is suitable for MOSFET, IGBT, SiC, and GaN gate-driver circuits, motor drives, industrial automation, inverters, EV power electronics, and other applications requiring compact isolated power supplies.
Features
- Galvanically Isolated Power: Provides electrical isolation between input and output circuits, helping reduce ground loops and electrical noise.
- Wide Input Voltage Range: Supports a 10V to 18V DC input supply.
- Dual Isolated Outputs: Provides 12V and 5V output terminals with an output current rating of up to 120mA.
- Integrated Transformer Design: Features a built-in isolation transformer for compact and efficient power conversion.
- Low Electromagnetic Emissions: Uses spread-spectrum modulation to help reduce electromagnetic interference (EMI).
- Comprehensive Protection Features: Includes undervoltage and overvoltage protection, short-circuit protection, power limiting, and overtemperature protection.
- Soft-Start Function: Provides controlled startup to reduce electrical stress during power-up.
- Enable Control: Enabled by default; pull the EN pin LOW to disable the converter. The EN pin voltage must not exceed 5V.
- Convenient Connectivity: Features screw terminals and 2.54 mm-pitch connector connections for easy integration.
- Versatile Applications: Suitable for MOSFET, IGBT, SiC, and GaN gate drivers, motor drives, inverters, industrial automation, and EV power electronics.
Specifications
- Product Type: Isolated DC-DC Converter Board
- Main IC: Texas Instruments UCC14130-Q1
- Input Voltage Range: 10V–18V DC
- Output Voltage: 12V and 5V DC
- Output Current Rating: 120mA
- Maximum Output Current: Up to 120mA
- Maximum Output Power: 1.5W (Total) at TA ≤ 105 C
- Isolation Voltage: 3kV RMS
- EMI Reduction: Spread-Spectrum Modulation
- Enable Control: Enabled by Default; Pull LOW to Disable
- Maximum EN Pin Voltage: 5V
- Conversion Efficiency: Approximately 49% at 25°C, VIN = 10V and 1.2W load
- Input Overvoltage Lockout (OVLO): 22V rising; 20V falling
- Input Undervoltage Lockout (UVLO): 7.4V falling; 8.2V rising
- Overtemperature Protection: 160°C typical
- Operating Temperature: -40 C to +105 C (Note: Spelled "Opearating" in the original image)
- Board Dimensions (L X W X H): 40 x 18 x 11.80 mm
Package Includes
- 1 × 7Semi UCC14130 1.5W Isolated DC-DC Converter Board
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ short quantity/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
Unboxing video is mandatory to report damaged or short quantity of the items in the order.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)



