CAPUF ESP Prog V1 - CP2102 Based ESP32 Programmer Board

CAPUF ESP Prog V1 - CP2102 Based ESP32 Programmer Board

ESP32 Programmer V1 board. It can be used in multiple ways, like programming ESP8266, ESP32, or any other microcontroller that needs boot Pin and Reset Pin control along with UART RX and TX for flashing the MCU with a new program.

Or one can also use it as a USB to UART adapter.

Resource

Features

• Compact size: 50mmx30mm
• USB-C Type Interface: you can connect a USB in any direction. Use USB-A to USB-C Cable.
• LEDs for Power, RX, TX
• Switch for Reset and Boot
• Both 3.3V and 5V are available on the O/P connector
• All signals on a standard 2.54mm Pitch Header (Header will come along with the board (unsoldered))

ESP Prog Pinout

1. 3.3V DC (100mA Max.)
2. TXD
3. RXD
4. GND
5. Reset/RTS
6. Boot/DTR
7. GND
8. 5V DC (500mA Max.)

ESP PROG Connections