Menu
Your Cart

Ebyte E50-900NW20SX UART EFR32FG23 868/915 MHz 20dBm Wireless SOC Module

Ebyte E50-900NW20SX UART EFR32FG23 868/915 MHz 20dBm Wireless SOC Module
Ebyte E50-900NW20SX UART EFR32FG23 868/915 MHz 20dBm Wireless SOC Module
Ebyte E50-900NW20SX UART EFR32FG23 868/915 MHz 20dBm Wireless SOC Module
Ebyte E50-900NW20SX UART EFR32FG23 868/915 MHz 20dBm Wireless SOC Module
Ebyte E50-900NW20SX UART EFR32FG23 868/915 MHz 20dBm Wireless SOC Module
Ebyte E50-900NW20SX UART EFR32FG23 868/915 MHz 20dBm Wireless SOC Module
Ebyte
Ebyte E50-900NW20SX UART EFR32FG23 868/915 MHz 20dBm Wireless SOC Module
₹​884.00
₹​749.15 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 7
B2B GST Credit Available
Price in reward points: 749

Ebyte E50-900NW20SX UART EFR32FG23 868/915 MHz 20dBm Wireless SOC Module

The E50-900NW20SX wireless module is an ideal solution for sub-1 GHz IoT wireless connectivity for smart home, security, lighting, building automation and metering. It is equipped with Silicon Labs' EFR32FG23 series chips, which can achieve wireless broadcasting up to 0.3~2.5 kilometers with minimal data loss in dense urban and canyon environments. At the same time, the module also carries firmware that supports WM-BUS (Wireless M-BUS) bus technology.

The E50-900NW20SX wireless module firmware is developed based on the EN13757-4/3 European standard, which can realize intelligent general instruments, data concentrators, and mobile computers. Seamless SUB-GHz RF communication protocol between meter devices and heat distribution meters.

The E50-900NW20SX wireless communication module can be used as an SoC (system on chip) development platform. It has the characteristics of small size, rich interface resources, and supports user secondary development, and can be widely used in the Internet of Things industry.


Datasheet


Features

  • Supports WM-BUS communication protocol and complies with EN 13757 and OMS organization protocol standards
  • Supports multiple WM-BUS working modes such as T(T1/T2), C(C1/C2), S(S1/S2) and R2
  • Supports 4-10 frequency points such as 868.3/868.95/869.525 MHz, and complies with WM-BUS communication protocol and European CE RED related RF specifications
  • Supports 4 airspeeds including 4.8/32.768/50/100 kbps
  • Supports multi-level transmit power settings, up to 20dBm
  • Support serial port AT commands
  • Support serial port hardware flow control
  • Supports 2400 ~ 921600 bps serial port baud rate
  • Supports long-distance communication, up to 2.5 km (clear and open sky, antenna gain 3.5 dBi, height 1.5 m, frequency 868.33MHz, airspeed 4.8 kbps)
  • Supports low power consumption, transmit current ≤ 45 mA (@15 dBm), receive current ≤ 6 mA, sleep current ≤ 2 uA
  • Supports 28 common data structures of water, electricity, steam, heat and other table types
  • Supports M-BUS frame format output to facilitate users to parse data


Specifications

  • Working frequency : 868MHz
  • Transmit power : 20 dBm
  • Receive sensitivity (GFSK) : 125dBm
  • Communication : UART
  • Measured distance : 2.5 km
  • IC : EFR32FG23A020F256GM40
  • Kernel : ARM Cortex®-M33
  • FLASH : 256 Kbytes
  • RAM : 32 Kbytes
  • Crystal frequency : 39MHz/32.768KHz
  • Antenna form :IPEX/stamp hole


Applications

  • Advanced Meter Infrastructure (AMI)
  • Smart meters/smart metering
  • smart city/municipal infrastructure
  • Industrial applications/building automation/distribution automation
  • smart home

Write a review

Note: HTML is not translated!
Bad Good
Captcha

Warranty Terms : 

Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.

Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.


What to take care of ?

Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.


Who pays the return shipping cost?

Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.


What voids warranty? 

Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.

If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement. 


Following items are not eligible for return under any circumstances 

  • Device Programmers / Dongles 
  • Soldering Consumables (Wire, Flux etc)