Ebyte E150-400T22S 433MHz 22dBm LoRa Wireless Acquisition Control Module - 5.6KM Communication Distance - UART Serial Port Interface

Ebyte E150-400T22S 433MHz 22dBm LoRa Wireless Acquisition Control Module - 5.6KM Communication Distance - UART Serial Port Interface

E150-400T22S is a wireless serial port module (UART) based on LoRa radio frequency chip, which works in the frequency band of 410.125～493.125MHz (default 433.125MHz) and adopts LoRa spread spectrum technology. The wireless acquisition module integrates (switch input) DI, (switch output) DO, (digital-to-analog converter) ADC, (analog-to-digital converter) DAC, (pulse width modulation) PWM and (remote radio) LoRa functions. Users can send Modbus RTU commands through the serial port or remote LoRa networking equipment for control, and it also supports low power consumption mode. The wireless acquisition control module supports LoRa direct sequence spread spectrum technology function, has the advantages of longer communication distance, strong anti-interference ability, and strong confidentiality; industrial-grade passive crystal oscillator ensures its stability and consistency.

Datasheet

Features

• Support advanced LoRa modulation method, with the advantage of long-distance anti-interference
• Under ideal conditions, the communication distance of E150-400T22S can reach 5.6km
• E150-400T30S is equipped with PA+LNA, and under ideal conditions, the communication distance can reach 10km.
• It supports 3.3-5.5V power supply and ensures optimal performance for power supplies greater than 5V
• Support air wake-up (ultra-low power consumption), suitable for battery applications
• The maximum transmit power is 1W, and the software can be adjusted in multiple levels
• Support global license-free ISM 433MHz frequency band, frequency range: 410.125 ~ 493.125MHz, channel spacing1MHz
• Support data transmission rate of 2.4k～62.5kbps
• Support 3.3~5.2V power supply, and the best performance can be guaranteed if the power supply is greater than 5V
• Support standard Modbus RTU protocol
• Support various configuration software/PLC/touch screen
• 4-way switch input DI
• 4-way switch output DO (DO1, DO2 open-drain output, DO3, DO4 push-pull output)
• 5-channel 12-bit ADC channel acquisition (2-channel voltage acquisition, 1-channel power supply voltage acquisitionand2-channel current acquisition)
• 2-channel 8-bit DAC output, only supports floating-point voltage value output
• 2-channel PWM output, frequency range 25 Hz ~ 65535 Hz, multi-level duty cycle adjustable
• Support 1~247 Modbus address settings, 0 is the public address
• Support sending non-local Modbus addresses to other networked LoRa devices
• Support transparent transmission of non-Modbus commands
• UART to RS485 control pin (external conversion chip is required)
• Support 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 and other baud rates
• Support low power consumption mode
• Support direct access of E22 series modules
• Using industrial-grade crystal oscillator, industrial-grade standard design, support long-term use at -40 ~ +85 ℃
• IPEX interface, external antenna can be installed.

Specifications

• Operating frequency: 410.125~493.125MHz
• Transmitting power: 22dBm
• Communication distance: 5.6km
• Working Voltage: 3.3V to 5.5V
• Communication interface: UART serial port
• Antenna interface: IPEX/stamp hole
• Working Temperature: -40 ~ +85 ℃
• Overall Dimensions: 31.0*18.0

Application

• Application of industrial PLC Modbus RTU
• Smart home and industrial sensors, etc.
• Wireless alarm security system
• Building automation solutions
• Wireless industrial grade remote control

Package Includes

• 1x Ebyte E150-400T22S 433MHz 22dBm LoRa Wireless Acquisition Control Module - 5.6KM Communication Distance - UART Serial Port Interface