This product qualifies for Free Surface Shipping !
B2B GST Credit Available
- Stock: 0 in Stock
- SKU: 08729
- Delivery Time
- Bulk & B2B RFQ
Elecrow 10.1 Inch Smart Home Control Panel for Home Assistant, Ready-to-Use, Wall-Mounted Touchscreen-Without Camera
A ready-to-use 10.1" Home Assistant control panel based on the Elecrow CrowPanel ESP32-P4. Connect it to Wi-Fi, link it to your Home Assistant server, and access the same dashboard, devices, scenes, and automations you already use. Designed as a dedicated wall-mounted interface, it keeps your smart home controls always available without relying on a phone or laptop.
Your Home Assistant Dashboard, Always Within Reach
Turn your Home Assistant setup into a dedicated wall-mounted smart home control center.
Powered by the CrowPanel Advanced 10.1-inch ESP32-P4 HMI platform, this Home Assistant control panel comes with the Home Assistant firmware pre-installed, so you don't need to develop your own ESP32 firmware or build a touchscreen interface from scratch.
Simply connect the panel to your Wi-Fi network, link it to your existing Home Assistant server, and access your dashboards, devices, scenes, and automations directly from the 10.1-inch touchscreen.
Features
- Home Assistant Ready: Pre-installed firmware for a quick, hassle-free smart home setup
- Ready Out of the Box: No ESP32 programming or HMI development required
- 10.1" IPS Touchscreen: 1024 × 600 resolution with responsive capacitive touch
- Wi-Fi Connected: Connect directly to your existing Home Assistant server.
- No Custom HMI Development: Use your existing dashboards, cards, scenes, and controls.
- Powerful ESP32-P4: Dual-core RISC-V processor for smooth and responsive HMI performance
- Wi-Fi 6 & Bluetooth: Fast and reliable wireless connectivity for smart home applications
- Built-in Audio: Dual speakers and microphone for interactive control and future voice applications
- Rich Expansion: GPIO, UART, I²C, USB-C, SD card, and optional wireless module support
Perfect for
- Smart Home Wall Panels
- Lighting & Scene Control
- Temperature & Climate Monitoring
- Energy Monitoring
- EV Charging Control
- Solar Energy Dashboards
- Security & Sensor Dashboards
- Home & Building Automation
Specifications
- CPU/SoC: ESP32-P4
- RISC-V 32-bit dual-core processor for HP systems, running at up to 400 MHz;
- RISC-V 32-bit single-core processor for LP systems, running at up to 40 MHz
- System Memory
- 768 KB L2MEM(HP)
- 32 KB SRAM(LP)
- ·8 KB TCM
- 32 MB PSRAM
- Memory
- 128 KB ROM(HP)
- 16 KB ROM(LP)
- 16 MB Flash
- Development Environment: ESP-IDF, Arduino IDE
- Firmware: Pre-installed Home Assistant Firmware (Ready-to-use)
- Size: 10.1 inch
- Resolution: 1024*600
- Display Panel: IPS Panel
- Touch Panel: Capacitive Touch, Single/5-point Touch
- Viewing Angle: 178°
- Brightness: 400 cd/m²(Typ.)
- Color Depth: 16.7M (8-bit)
- WiFi: Support 2.4GHz(Wi-Fi6), 802.11 b/g/n
- Bluetooth: Supports Bluetooth 5.3 and BLE
- Other: Zigbee、LoRa、nRF2401、Matter、Thread and Wi-Fi Halow (Optional)
- Interface: USB2.0, UART, I2C, GPIO female headers, SD card holder, battery socket, speaker jack, camera header, module female headers, etc.
- Function: Audio amplifier, battery charge management, USB to UART, microphones, dual speakers, etc.
- Speaker Connector
- Model: BX-PH 2.0-2PWT
- Number of Pins: 1x2P
- Pin Pitch: 2mm
- Dimensions(L*W*H): 8*8.5*5.6mm
- Mounting Type: SMT Right Angle
- Reset Button: Yes, press to reset the device
- Boot Button: Yes, press and hold the power button to burn the program
- Power Button: Switch On/Off
- PWR: Device power on/off indication
- CHG: Lithium battery charging status, Low battery state
- Installation method: All around mounting holes(M3 3.2mm)
- Operating temperature: -20~70 °C
- Storage temperature: -30~80 °C
- Power Input: 5V/2A, USB or UART terminal
- Dimensions: 248*147mm
Package Includes
- 1x Elecrow 10.1 Inch Smart Home Control Panel for Home Assistant, Ready-to-Use, Wall-Mounted Touchscreen-Without Camera
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)
