Menu
Your Cart

ESP32-S3 1.75inch AMOLED Round Touch Display Development Board, 32-bit LX7 Dual-core Processor, 466×466 Pixels, QSPI Interface, Onboard Dual Digital Microphone Array, ESP32 With Display

ESP32-S3 1.75inch AMOLED Round Touch Display Development Board, 32-bit LX7 Dual-core Processor, 466×466 Pixels, QSPI Interface, Onboard Dual Digital Microphone Array, ESP32 With Display
ESP32-S3 1.75inch AMOLED Round Touch Display Development Board, 32-bit LX7 Dual-core Processor, 466×466 Pixels, QSPI Interface, Onboard Dual Digital Microphone Array, ESP32 With Display
ESP32-S3 1.75inch AMOLED Round Touch Display Development Board, 32-bit LX7 Dual-core Processor, 466×466 Pixels, QSPI Interface, Onboard Dual Digital Microphone Array, ESP32 With Display
ESP32-S3 1.75inch AMOLED Round Touch Display Development Board, 32-bit LX7 Dual-core Processor, 466×466 Pixels, QSPI Interface, Onboard Dual Digital Microphone Array, ESP32 With Display
ESP32-S3 1.75inch AMOLED Round Touch Display Development Board, 32-bit LX7 Dual-core Processor, 466×466 Pixels, QSPI Interface, Onboard Dual Digital Microphone Array, ESP32 With Display
New
ESP32-S3 1.75inch AMOLED Round Touch Display Development Board, 32-bit LX7 Dual-core Processor, 466×466 Pixels, QSPI Interface, Onboard Dual Digital Microphone Array, ESP32 With Display
ESP32-S3 1.75inch AMOLED Round Touch Display Development Board, 32-bit LX7 Dual-core Processor, 466×466 Pixels, QSPI Interface, Onboard Dual Digital Microphone Array, ESP32 With Display
ESP32-S3 1.75inch AMOLED Round Touch Display Development Board, 32-bit LX7 Dual-core Processor, 466×466 Pixels, QSPI Interface, Onboard Dual Digital Microphone Array, ESP32 With Display
ESP32-S3 1.75inch AMOLED Round Touch Display Development Board, 32-bit LX7 Dual-core Processor, 466×466 Pixels, QSPI Interface, Onboard Dual Digital Microphone Array, ESP32 With Display
ESP32-S3 1.75inch AMOLED Round Touch Display Development Board, 32-bit LX7 Dual-core Processor, 466×466 Pixels, QSPI Interface, Onboard Dual Digital Microphone Array, ESP32 With Display
WaveShare Electronics
ESP32-S3 1.75inch AMOLED Round Touch Display Development Board, 32-bit LX7 Dual-core Processor, 466×466 Pixels, QSPI Interface, Onboard Dual Digital Microphone Array, ESP32 With Display

This product qualifies for Free Surface Shipping !

All orders with value above 1999+GST are eligible for free delivery in Surface mode. (Not applicable for B2B offline orders)
₹​4,239.00
₹​3,592.37 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 36
B2B GST Credit Available
Price in reward points: 3592

The ESP32-S3-Touch-AMOLED-1.75 is a high-performance, highly integrated MCU board designed by Waveshare. It is compact in size, onboard 1.75inch AMOLED capacitive touch display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low power audio codec, echo cancellation circuit, and so on, which makes it easy for you to develop and integrate into the products quickly.


Features

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
  • Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory
  • Type-C connector, improving device compatibility, easier to use
  • Onboard 1.75inch AMOLED capacitive touch display for clear color picture display, 466 × 466 resolution, 16.7M color
  • Built-in CO5300 display driver and CST9217 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources
  • Equipped with dual digital microphones array for audio algorithms such as noise reduction and echo cancellation, suitable for accurate speech recognition and near-field / far-field voice wake-up applications
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.
  • Onboard PCF85063 RTC chip, powered by Lithium battery through AXP2101 chip for uninterrupted power supply
  • Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard 3.7V MX1.25 Lithium battery recharge/discharge header
  • Onboard 8PIN 2.54mm header adapting 3 × GPIO and 1 × UART, and reserved pads of I2C and 3 × expanded IO interfaces, for connecting peripherals and debugging
  • Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
  • Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc.
  • Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc.


Resources

User Manual / Datasheet / Example Codes Etc.


Specifications

Display PanelAMOLEDDisplay Size1.75 inch
Resolution466 × 466 pixelsDisplay Colors16.7M
Brightness700 cd/㎡Contrast Ratio100000:1
Communication InterfaceQSPIDriver ICCO5300
TouchSupportedTouch ICCST9217


Onboard Peripherals



  1. ESP32-S3R8
    The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 8MB PSRAM
  2. Onboard antenna
    Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)
  3. IPEX1 connector
    Switching to use the external antenna via resoldering an onboard resistor
  4. PWM button
    for system power supply ON/OFF, supports custom function
  5. BOOT button
    for device startup and function debugging
  6. MX1.25 2P speaker header
  7. TCA9554
    GPIO expander chip
  8. PCF85063
    RTC chip
  9. QMI8658
    6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer
  1. AXP2101
    Highly integrated power management IC
  2. 2.54mm 8PIN header
    for debugging and connecting peripherals
  3. Dual microphones
    with onboard echo cancellation circuit, enabling higher-quality audio capture
  4. IPEX 1 GPS connector
    for connecting GPS antenna (for the GPS version only, with built-in LC76G module)
  5. Type-C port
    ESP32-S3 USB interface, for program burning and log printing
  6. ES7210
    Echo cancellation algorithm chip, for reducing echo and enhancing audio capture accuracy
  7. MX1.25 Lithium battery header
    MX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging


Dimensions

Write a review

Note: HTML is not translated!
Bad Good
Captcha