Menu
Your Cart

Espressif ESP32-S31-WROOM-3 Wireless Module | Wi-Fi 6, Bluetooth 5.4, Zigbee & Thread

Espressif ESP32-S31-WROOM-3 Wireless Module | Wi-Fi 6, Bluetooth 5.4, Zigbee & Thread
New
Espressif Systems
Espressif ESP32-S31-WROOM-3 Wireless Module | Wi-Fi 6, Bluetooth 5.4, Zigbee & Thread
₹​884.00
₹​749.15 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 7
B2B GST Credit Available
Price in reward points: 749

Espressif ESP32-S31-WROOM-3 Wireless Module | Wi-Fi 6, Bluetooth 5.4, Zigbee & Thread

The Espressif ESP32-S31-WROOM-3 is a next-generation, high-performance wireless communication module built around the ESP32-S31 SoC. Powered by a dual-core 32-bit RISC-V processor running up to 320MHz, it delivers exceptional performance for advanced IoT, smart home, industrial automation, edge AI, and multimedia applications. The module integrates 2.4GHz Wi-Fi 6, Bluetooth 5.4 (LE & Classic), Zigbee 3.0, and Thread 1.4 connectivity, enabling seamless multi-protocol wireless communication from a single module.

Designed for demanding embedded systems, the ESP32-S31-WROOM-3 supports Matter, Bluetooth Mesh, and advanced Wi-Fi 6 technologies such as OFDMA, MU-MIMO, and Target Wake Time (TWT) for improved efficiency and lower power consumption. The module also features a rich set of peripherals including USB 2.0 High-Speed OTG, CAN FD, Ethernet MAC, SPI, I2C, I2S, UART, SD/MMC, ADC, DAC, touch sensing, PWM, and LCD/Camera interfaces, making it suitable for intelligent gateways, HMI devices, smart appliances, robotics, and industrial IoT solutions.


Datasheet


Features

  • ESP32-S31 dual-core 32-bit RISC-V processor running up to 320 MHz
  • Multi-protocol wireless connectivity: 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5.4 LE, Bluetooth Classic, Zigbee 3.0, Thread 1.4, and Matter support
  • On-board PCB antenna for reliable wireless communication
  • Up to 32MB external PSRAM and optional SPI Flash support
  • Supports OFDMA, MU-MIMO, Target Wake Time (TWT) for efficient Wi-Fi 6 performance
  • Rich peripheral interfaces including USB 2.0 High-Speed OTG, Ethernet MAC, CAN FD, UART, SPI, I2C, I2S, SD/MMC, ADC, DAC, Touch Sensor, PWM, LCD & Camera Interface
  • Integrated 40MHz crystal oscillator
  • Hardware security with Secure Boot, Flash Encryption, Secure Debug, Hardware Cryptography
  • Wide operating voltage: 3.0V–3.6V
  • Industrial operating temperature: -40°C to +85°C
  • Ideal for IoT, Smart Home, Matter devices, Industrial Automation, AI Edge Devices, Smart Gateways, Wearables, and Multimedia Applications.


Specifications

  • Module: Espressif ESP32-S31-WROOM-3
  • MCU: ESP32-S31
  • CPU: Dual-Core 32-bit RISC-V
  • Clock Speed: Up to 320 MHz
  • Wireless: Wi-Fi 6, Bluetooth 5.4 LE, Bluetooth Classic, Zigbee 3.0, Thread 1.4
  • Wi-Fi Band: 2.4 GHz
  • Wi-Fi Standard: IEEE 802.11 b/g/n/ax
  • Bluetooth: Bluetooth LE 5.4 & Classic
  • IEEE 802.15.4: Supported
  • Matter: Supported
  • Antenna: On-board PCB Antenna
  • GPIO: Up to 54 GPIOs (module dependent)
  • Interfaces: USB OTG, Ethernet MAC, UART, SPI, I2C, I2S, SD/MMC, CAN FD, PWM
  • ADC/DAC: Yes
  • Touch Sensor: Yes
  • Operating Voltage: 3.0V–3.6V
  • Operating Temperature: -40°C to +85°C
  • Applications: Smart Home, IoT, Industrial Control, Matter Devices, Wireless Gateways, Embedded Systems


Package Includes

  • 1x Espressif ESP32-S31-WROOM-3 Wireless Module | Wi-Fi 6, Bluetooth 5.4, Zigbee & Thread

Write a review

Note: HTML is not translated!
Bad Good
Captcha

Warranty Terms : 

Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.

Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.


What to take care of ?

Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.


Who pays the return shipping cost?

Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.


What voids warranty? 

Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.

If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement. 


Following items are not eligible for return under any circumstances 

  • Device Programmers / Dongles 
  • Soldering Consumables (Wire, Flux etc)