B2B GST Credit Available
- Stock: 0 in Stock
- SKU: 03042
- Delivery Time
- Bulk & B2B RFQ
Overview
The ESP32-S is a wireless module based on ESP32, supports WiFi and Bluetooth 4.2, with built-in 32Mbit Flash, in the SMD38 package. There're also onboard PCB antenna and metal shield. In short, it's a small form factor and fairly high cost effective wireless module.
With the pre-flashed AT firmware, you can control the module through UART AT commands easily. The module integrates MCU inside, supports other developments like Lua/Micropython/Arduino to achieve flexible and fast prototyping, make it easy to integrate the module into IoT applications.
Features
- 802.11b/g/n Wi-Fi+BT SOC
- Dual-core 32-bit CPU, 240 MHz frequency, computing capability up to 600DMIPS
- Built-in two 12 bit SAR ADCs, up to 18 channels
- Supports UART/SPI/I2C/SDIO/GPIO/ADC/PWM
- SMD38 package
- Supports OpenOCD debug interface
- Supports multi sleep modes, deep sleep current as low as 6.5uA
- UART baudrate up to 4Mbps
- Embedded Lwip and FreeRTOS
- Supports STA/AP/STA+AP operation mode
- Supports Smart Config (APP) / AirKiss (WeChat), one key networking
- Supports UART local firmware upgrade and/or remote firmware upgrade (FOTA)
- AT commands for getting started fast
- Supports secondary development, integrated Windows / Linux environment
The ESP32-S suit for IOT applications such as:
- Smart home
- Intelligent building
- Industrial automation
- Wearable devices
- IP camera
- Intelligent agriculture
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)
