LILYGO LoRa V1.4 SX1278 433MHz ESP32 Wireless WiFi Bluetooth Module With 0.96inch OLED (G518-B)

LILYGO LoRa V1.4 SX1278 433MHz ESP32 Wireless WiFi Bluetooth Module With 0.96inch OLED (G518-B)

This is an LILYGO LoRa V1.4 SX1278 433MHz ESP32 Wireless WiFi Bluetooth Module With 0.96inch OLED. The LILYGO LoRa V1.4  SX1278 based on ESP32 MCU, Which comes with 433MHz frequency, -148dBm, +20dBm output power, high reliability, long transmission distance. 

User Manual / Datasheet / Example Codes Etc.

Notice

• The 433MHz antenna must be used in conjunction with the IPEX interface (if the antenna is not connected, The signal will weaken).
• Lithium battery charging and discharging circuit, when the battery is full, the LED will stop working.
• When using, pay attention to "+" and "-" of the battery.Using the IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor at this pin!
• Operating voltage: 3.3V to 7
• VOperating temperature range: -40 degrees C to +90 degrees C
• Support for Sniffer, Station, softAP, and Wi-Fi Direct modes
• Data rates: 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, 11 Mbps@11b
• Transmit power: 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n
• Receiver sensitivity up to -98 dBm
• Red light: power indicator
• Blue light: IO25 programmable control

Package Includes 

• 1 X LoRa V1.4 433Mhz CH9102F
• 1 X Power cable (Jst 2pin 1.25mm)
• 1 X Antenna
• 2 X Pin

Pin Daigram

Test details