LILYGO T-Camera Plus S3 ESP32-S3 + OV5640 Camera Module Development Board With 1.3inch Capacitive Touch LCD Display (H703-01)

LILYGO T-Camera Plus S3 ESP32-S3 + OV5640 Camera Module Wireless WiFi Bluetooth Development Board With 1.3inch Capacitive Touch TFT LCD Display (H703-01)

T-CameraPlus-S3 is an intelligent camera module developed based on the ESP32S3 chip, equipped with a 240x240 TFT display, digital microphone, speaker, independent button, power control chip, SD card module, etc. It comes with a basic UI written based on LVGL, which can achieve functions such as file management, music playback, recording, and camera projection (if the factory does not write the program, you need to manually burn the UI program named "Lvgl_UI").

User Manual / Datasheet / Example Codes Etc.

Specifications

•  MCU
• Chip: ESP32-S3
• PSRAM: 8M
• FLASH: 16M

• Camera Model: OV5640

• Screen

• Screen Model: fp-133h0M1d
• Size: 1.3-inch
• Resolution Ratio: 240x240px
• Screen Type: TFT
• Driver Chip: ST7789V
• Bus Communication Protocol: Standard SPI

• Touch
• Chip: CST816S
• Bus Communication Protocol: IIC

• Speaker
• Driver Chip: MAX98357A
• Speaker Model: FS2011NB0807x
• Speaker Size:14x7.1x3.9cm
• Bus Communication Protocol: IIS
• Others: Default configuration is Left/2 + Right/2 channels, gain of 9dB. To change the configuration, refer to the T-CameraPlus-S3 design schematic and adjust the resistors. The selected speaker should have a maximum rated power of 3.2W, with a impedance of around 4 ohms or less than 8 ohms.

• Microphone
• Driver Chip: MSM261S4030H0R
• Bus Communication Protocol: IIS
• Others: Default configuration is right channel. To change the configuration, refer to the T-CameraPlus-S3 design schematic and adjust the resistors.

Package Includes

Pin Diagram