USB To UART Debugger Module for Raspberry Pi 5, Type-A Port, Onboard UART Connector, High Baud Rate Transmission

USB To UART Debugger Module For Raspberry Pi 5, Type-A Port, Onboard UART Connector, High Baud Rate Transmission, Multi Connection Methods, Multi System Support

User Manual / Datasheet / Example Codes Etc.

Features

• Supports Mac, Linux, Android, Windows 7/8/8.1/10/11
• Onboard self-recovery fuse and Transient Voltage Suppressor, anti-overcurrent and anti-overvoltage, anti-surge, anti-static, improves shock proof performance, stable and safe communication performance
• Onboard IO protection circuits, anti-surge, anti-static, stable and safe communication performance
• Onboard 3.3V and 5V TTL level switch pins for selecting TTL communication level
• Supports 3.3V/5V output (the module is powered by USB, and the onboard jumper should be shorted to 3.3V or 5V accordingly)
• Adopts double-sided black immersion gold process, which is durable and has a good look

Specifications

• HOST INTERFACE : USB
• DEVICE INTERFACE : UART
• COMMUNICATION RANGE : 50bps ~ 6Mbps
• USB DEVICE INTERFACE : connector: USB Type-A; / protection: self-recovery fuse, ESD protection
• UART INTERFACE : connector: 6pin right-angle pinheader; 3pin connector / protection: IO protection diode

Package Includes

• Pi UART Debugger x1
• 6-pin squid cable x1
• SH1.0 connector to 3PIN cable ~100mm x1
• Dual SH1.0 connector 3PIN cable ~100mm x1

Multiple Protection Circuit, Safe And Stable

Interface Introduction

• PWR : Power indicator, turns on when voltage is detected from USB interface
• RXD : Receiving indicator, turns on when data is sent back from the device interface
• TXD : Sending indicator, turns on when data is sent from USB

Pinouts Definition

• VCC : 5V or 3.3V output for external device (configured by jumper)
• GND : Ground
• TXD : Connects to MCU.RXD
• RXD : Connects to MCU.TXD
• RTS# : Connects to MCU.CTS
• CTS# : Connects to MCU.RTS

Connection Example

Outline Dimensions