Waveshare RP2350-LCD-0.96 Development Board, With 0.96inch LCD Display, 160×80 Resolution, Based On RP2350A Dual-core & Dual-architecture Microcontroller

Waveshare RP2350-LCD-0.96 Development Board, With 0.96inch LCD Display, 160×80 Resolution, Based On RP2350A Dual-core & Dual-architecture Microcontroller

The RP2350-LCD-0.96 is a low-cost, high-performance microcontroller development board designed by Waveshare with flexible digital interfaces. In terms of hardware, it uses the RP2350A microcontroller chip officially developed by Raspberry Pi, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard 3 RISC-V processor, with a running frequency of up to 150MHz, built-in 520KB SRAM and 4MB memory, and up to 26 multi-function GPIO pins, a 0.96-inch LCD screen, and a battery interface, which is convenient for use in mobile applications.

Its power IC TPS63000 is a high-efficiency DCDC buck-boost chip with a charge current up to 1A and a 1.8A current switch. For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, and there are complete development materials and tutorials, which makes it easy for you to get started, and integrate it into end products quickly.

User Manual / Datasheet / Example Codes Etc.

Features & Specs

• RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
• Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz
• 520KB of SRAM, and 4MB of on-board Flash memory
• USB-C connector, keeps it up to date, easier to use
• 0.96inch 160×80 pixels 65K colorful IPS LCD display
• Lithium battery recharge/discharge header, suitable for mobile devices
• Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current
• Castellated module allows soldering directly to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 12 × Programmable I/O (PIO) state machines for custom peripheral support

Package Includes

• 1x RP2350-LCD-0.96

26 × multi-function GPIO pins

configurable pin function, allows flexible development and integration

What's On Board

Dimensions