Menu
Your Cart
Our order fulfillment operations will remain suspended on 29th and 30th March 2024 for FY Closing. Any order placed after 2 PM on 28th March will be shipped on 1st April 2024. 

CH455G LED Display Driver control chip SOP-16

CH455G LED Display Driver control chip  SOP-16
WCH
CH455G LED Display Driver control chip SOP-16
₹​34.22
₹​29.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout

B2B GST Credit Available
Price in reward points: 29

CH455G LED Display Driver control chip  SOP-16


Datasheet

CH455 is LED display drive and keyboard scan control chip. It sets clock surge circuit internally to drive four bits number LED or thirtytwo LEDs dynamically. And at the same time it can scan 28-key. CH455 exchanges data with MCU via two wires serial interface of SCL and SDA. 

The CH445G MCU (DSP, microprocessor etc. controller) controls CH455 chip via 2-wire serial interface. The numeric display driver is independent of keyboard scan control, so the MCU can start, close, set the two functions separately. The 2-wire serial interface of CH455is achieved by hardware, and the MCU can high-speed operate on the serial interface frequently, the efficient of CH455 has no influence.


Features

  •  Set display current drive layer internally, the current of segment is no less than 25mA, the current of word is no less than 160mA.
  •  Display scan control dynamically, support 8×4 or 7×4, directly drive four bits number LED or thirty two LEDs.
  •  Internal limit current, set eight level light control via space percentage.
  •  Set 28-key keyboard control, based on 7×4 matrix scan..
  •  Set pull-down resistor internal while key-press, glitter removable.
  •  Supply keyboard interrupt active with low-level, and supply key-press release token to check the key is pressed or release.
  •  High speed two wires serial interface, the speed of clock varies from 0 to 4MHz, compatible with I2C bus, save pins.
  •  Set turn on power to reset, 2.7V~5V power.
  •  Support low exhaust sleep mode to save energy, awoke via press key or command.
  •  Set clock surge circuit internally, the external clock or surge equipment is not necessary, resister to be disturbed.
  •  Supply DIP18, SOP18 and SOP16 package without lead, compatible with RoHS, the function and pins are part compatible with CH450.

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: Sensor , CH445G