B2B GST Credit Available
- Stock: 49 in Stock
- SKU: 13338
- Delivery Time
- Bulk & B2B RFQ
Waveshare 1.54inch e-Paper Module (B), 200×200 Red Black White E-Ink Display, SPI Interface for Raspberry Pi / Arduino / STM32
The Waveshare 1.54inch e-Paper Module (B) is a compact red, black, and white E-Ink display module with a 200×200 pixel resolution and SPI communication interface. It is designed for embedded systems, IoT projects, and low-power applications where the display must remain clearly visible without continuous power.
This 1.54-inch e-Paper module provides a paper-like viewing experience with a wide viewing angle and excellent readability under ambient light. Since e-Paper displays do not require a backlight and consume power mainly during screen refresh, this module is highly suitable for battery-operated products, smart labels, portable instruments, shelf labels, and industrial status displays.
The onboard voltage translator makes the module compatible with both 3.3V and 5V controller boards, allowing easy integration with platforms such as Raspberry Pi, Arduino, STM32, Nucleo, Jetson Nano, ESP32, and other SPI-compatible development boards. The red/black/white colour support helps highlight important information such as warnings, prices, labels, status messages, and alerts.
The Waveshare 1.54inch e-Paper Module (B) is a reliable choice for engineers, makers, students, and product developers looking for a compact, low-power display for IoT and embedded display applications.
Features
- → No backlight needed, keeps displaying last content for a long time even when power down
- → Ultra low power consumption, basically power is only required for refreshing
- → SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
- → Onboard voltage translator, compatible with 3.3V/5V MCUs
- → Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)
Developer Resources
www.waveshare.com/wiki/1.54inch_e-Paper_Module_(B)
| VCC | 3.3V |
| GND | GND |
| DIN | SPI MOSI |
| CLK | SPI SCK |
| CS | SPI chip select (Low active) |
| DC | Data/Command control pin (High for data, and low for command) |
| RST | External reset pin (Low for reset) |
| BUSY | Busy state output pin (Low for busy) |
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)
