
B2B GST Credit Available
- Stock: 3 in Stock
- SKU: 01732
- Delivery Time
- Bulk & B2B RFQ
PADI IoT Stamp - RTL8710 WiFi SoC - Assembled with Breadboard adapter
PADI IoT Stamp is a highly integrated, single-chip, low power WiFi controller with built-in antenna. The stamp combines an ARM Cortex M3, integrated Flash and RAM, WLAN MAC, WLAN baseband, RF balun, PA, LNA receiver, saw filter and power management module. Designs for makers with high speed SPI/I2C/UART interfaces for IoT applications with minimum Printed Circuit Board (PCB) area requirement. The PADI IoT Stamp is even smaller than a US stamp size.
Links -
| Specifications | ||
|---|---|---|
| Wireless | WiFi Standard: Frequency Range: | 802.11 b/g/n 2.4 GHz - 2.5 GHz (2400 MHz - 2483.5 MHz) |
| Hardware | SoC : CPU : ROM / RAM / FLASH : SPI : UART : PWM : I2C : GPIO : Operating Voltage : Operating Temperature : Dimension : Wireless Network Mode : | Realtek RTL8710AF ARM Cortex M3 (83 MHz) 1MB / 512KB / 1MB Up to 1 (41.5 Mbps) Up to 3 (2 x 4 Mbps + 1 x 38400 bps) Up to 4 Up to 1 (3.4 Mbps) Up to 19 (including 10 GPIO_INT) 3.0 V ~ 3.6 V (recommended 3.3 V) -20 ℃ ~ 85 ℃ 24 mm x 16 mm x 0.8 mm Station / SoftAP / SoftAP + Station |
| Software | Bitrate : Hash : Security Standard : Encryption : Firmware Update : OS : Development Tools: Network Protocol : User Configuration : | 802.11b : 11 Mbps , 802.11g : 54 Mbps , 802.11n : 150 Mbps MD5 / SHA / HMAC-SHA WPA / WPA2 WEP / TKIP / AES UART / OTA / JTAG FreeRTOS, ARM® mbed™ (future planning) IAR, openOCD, J-Link TCP / UDP / HTTP / FTP AT Commands, Cloud Server, Android / iOS APP |
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)













