WaveShare Electronics
₹4,020.34 + 18% GST
B2B GST Credit Available
4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels, SPI Interface
Universal e-Paper Driver Board with WiFi SoC ESP8266 onboard, supports various Waveshare SPI e-Paper raw panelsThis is a universal driver board fo..
₹1,177.64
Ex Gst ₹998.00
Universal e-Paper Driver Board with WiFi / Bluetooth SoC ESP32 onboard, supports various Waveshare SPI e-Paper raw panelsThis is a universal drive..
₹1,390.04
Ex Gst ₹1,178.00
This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper from Waveshare.This driver board is NOT su..
₹856.68
Ex Gst ₹726.00
This is a Raspberry Pi IoT driver board for e-Paper raw panels. It allows getting text/image data from IoT clouds through NB-IoT/eMTC/EDGE/GPRS networ..
₹3,053.84
Ex Gst ₹2,588.00₹4,744.00
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 40
B2B GST Credit Available
Price in reward points: 4020
- Stock: 0 in Stock
- SKU: 19283
- Delivery Time
- Bulk & B2B RFQ
4.01inch Colorful E-Paper E-Ink Display HAT For Raspberry Pi, 640×400 Pixels, ACeP 7-Color, SPI Interface
The N-Color 4.01” is a 640x400 ePaper display with integrated timing control and power management circuitry. Each pixel on the display has the capability of showing seven states – black, white, blue, orange, yellow, green and red. The N-Color 4.01” panel is ideal for applications such as signage for retail pricing with the ability to highlight promotions with other 5 colors, blue, orange, yellow, green and red.
Features
- High contrast reflective/electrophoretic technology
- 640(H) x 400(V) display
- Seven colours
- Ultra wide viewing angle
- Ultra low power consumption
- Pure reflective mode
- Bi-stable
- Commercial temperature range
- Landscape type.
- Plastic substrate.
- All in one IC that integrated source driver, gate driver, TCON, PMIC and OTP memory in the module.
Specifications
- OPERATING VOLTAGE : 3.3V/5V
- DISPLAY COLOR : ACeP 7-Color
- INTERFACE : 3-wire SPI, 4-wire SPI
- GREY SCALE : 2
- OUTLINE DIMENSIONS : 98.50 × 70.00mm
- FULL REFRESH TIME : 30s
- DISPLAY SIZE : 86.40 × 54.00mm
- REFRESH POWER : 50mW(typ.)
- DOT PITCH : 0.135 × 0.135mm
- STANDBY CURRENT : <0.01uA (almost none)
- RESOLUTION : 640 × 400 pixels
- VIEWING ANGLE : >170°
Package Includes
- 4.01inch e-Paper (F) x1
- RPi screws pack (5pcs) x1
- PH2.0 20cm 8Pin x1
Onboard SPI Control Interface
- VCC : 3.3V/5V
- GND : Ground
- DIN : SPI MOSI pin
- CLK : SPI SCK pin
- CS : SPI chip selection, low active
- DC : Data / Command selection (high for data, low for command)
- RST : External reset, low active
- BUSY : Busy status output
Onboard Voltage Translator
Dimensions
