0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface

0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface

This is an 0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface, The 0.96inch RGB OLED display module comes with 3/4-wire SPI interface with SSD1357 deiver, Which support for Raspberry Pi/Arduino/STM32 and etc.

User Manual / Datasheet / Example Codes Etc.

Features

• 64×128 resolution OLED display, 65K colors, clear and colorful displaying effect
• SPI interface, minimizes required IO pins
• Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)

Specifications

• Operrating Voltage : 3.3V / 5V
• Resolution : 64 × 128 pixels
• Communication Interface : 3/4-wire SPI
• Display Size : 10.862 × 21.736mm
• Display Panel : OLED
• Pixle Size : 0.0327 × 0.146mm
• Driver : SSD1357
• Module Size : 32.5 × 26.0mm

Control Interface

• VCC : Power (3.3V / 5V input)
  
• GND : Ground
• DIN : SPI data input
• CLK : SPI clock input
• CS : Chip selection, low active
• DC : Data/Command selection (high for data, low for command)
• RST : Reset, low active

Usage Example

Dimensions