Menu
Your Cart
Orders placed on 12th and 13th October will be shipped on 14th October.  

1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI

1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
WaveShare Electronics
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×135, SPI
₹​695.02
₹​589.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 6
B2B GST Credit Available
Price in reward points: 589

The built-in controller used in this LCD is ST7789VW, which is an LCD controller with 240 x RGB x 320 pixels, while the pixels of this LCD itself is 135 (H) RGB x 240 (V). There are two types of horizontal and vertical screens, so the internal RAM of the LCD is not fully used. The LCD supports 12-bit, 16-bit, and 18-bit input color formats per pixel, namely RGB444, RGB565, and RGB666 three color formats, this routine uses RGB565 color format, which is also a commonly used RGB format.

The LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster.


Features

  • 240×135 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
  • SPI interface, requires minimal IO pins
  • 1x joystick and 2x user buttons for easy interacting
  • Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples


Specifications

OPERATING VOLTAGE2.6 ~ 5.5VRESOLUTION240×135 pixels
COMMUNICATION INTERFACE4-wire SPIDISPLAY SIZE24.91 × 14.86mm
DISPLAY PANELIPSPIXEL SIZE0.1101 × 0.1035mm
DRIVERST7789DIMENSIONS52.00 × 25.00mm



Resources

User Guide


Pinouts


Compatibility

Write a review

Note: HTML is not translated!
Bad Good
Captcha