5.79inch E-Paper Module (B), e-ink display, 792x272, Red/Black/White, SPI Interface

5.79inch E-Paper Module (B), e-ink display, 792x272, Red/Black/White, SPI Interface

User Manual / Datasheet / Example Codes Etc.

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Series/Arduino/STM32, etc.
• Onboard voltage translator, compatible with 3.3V/5V MCUs
• Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/Arduino/STM32)

• OPERATING VOLTAGE : 3.3V
• DISPLAY COLOR : Red/Black/White
• INTERFACE : 3-wire SPI, 4-wire SPI
• GREY SCALE : 2
• OUTLINE DIMENSIONS : 150.92 × 56.94 × 1.00mm
• FULL REFRESH TIME : 24s
• DISPLAY SIZE : 139.00 × 47.74mm
• REFRESH POWER : <50mW
• DOT PITCH : 0.1755 × 0.1755mm
• STANDBY CURRENT : <0.01uA (almost none)
• RESOLUTION : 792 × 272 pixels
• VIEWING ANGLE : >170°

• 5.79inch e-Paper Module (B) x1
• GH1.25 9PIN cable 20cm x1

Onboard SPI Control Interface

• PWR : Power on/off control
• BUSY : Busy status output pin
• RST : External reset, low active
• DC : Data/Command selection (high for data, low for command)
• CS : SPI chip selection, low active
• CLK : SPI SCK pin
• DIN : SPI MOSI pin
• GND : Ground
• VCC : Power (3.3V / 5V input)

Onboard Voltage Translator