CAPUF CH32V003 Development Kit With 0.96inch OLED Display (Programmer Included)

CAPUF CH32V003 Dev Kit: All-in-One MCU Development Board With 0.96inch OLED Display

The CAPUF CH32V003 Development Kit is a comprehensive platform designed for developers and engineers to explore and utilize the capabilities of the CH32V003 microcontroller. Equipped with a 0.96-inch OLED display, this development kit offers an ideal environment for prototyping, testing, and developing embedded applications.

The CH32V003 is an ultra-low-cost (10-cent) 32-bit microcontroller based on the RISC-V 2A core. It has a maximum system main frequency of 48MHz and features 2KB of SRAM and 16KB of Flash memory.

The CH32V003 also has a wide range of peripheral interfaces, including a DMA controller, a 10-bit ADC, an op-amp comparator, multiple timers, and standard communication interfaces such as USART, I2C, and SPI. The CH32V003 can be used in a wide range of applications.

• CH32V003 Programming Tutorial

User Manual / Datasheet / Example Codes Etc.

Features

• USB-C Port for Power (5V) and Serial Interface
• On Board 3.3V LDO
• UART – USB to UART
• I2C Interface

• Temperature Humidity Sensor
• I2C – Qwiik Connector for connecting external sensor boards
• I2C – 0.96″ 128×64 Pixels OLED Display Module (included in the package)
• I2C – Male 4 Pin Header is provided to connect to other boards via jumper wires. The connector is not soldered on the board.

• SPI – 8Mbit SPI NOR Flash
• PWM – RGB LED
• GPIO – I/P – Two Keys
• ADC I/P – Variable Resistor / Potentiometer
• GPIO – O/P – One LED and one Buzzer
• 3 Pin header for WCH-LinkE Programmer
• 20 Pin MCU IOs Breakout on headers
• LED Indications for 5V/3.3V/UART RX, TX
• Option for connecting external 24Mhz Oscillator
• MCU Reset Button is provided on the board

Specifications

• Microcontroller: CH32V003 Core 32-bit RISC-V
• Display: 0.96-inch OLED
• Interfaces: UART, SPI, I2C, GPIO, ADC
• USB-C Port for Power (5V) and Serial Interface

Applications

• Embedded Systems: Ideal for learning and experimenting with embedded system design.
• IoT Prototyping: Suitable for developing Internet of Things (IoT) devices with display capabilities.
• Educational Tool: Great for educational purposes, helping students and hobbyists learn microcontroller programming and interfacing.
• Consumer Electronics: Development of small consumer electronics requiring display output.

Package Includes

• CH32V003 Dev Kit Development Board with OLED Display
• USB-A to USB-C Cable
• WCHLinkE Programmer
• Jumper wires