Menu
Your Cart

R800C GSM/GPRS HAT For Raspberry Pi

R800C GSM/GPRS HAT For Raspberry Pi
R800C GSM/GPRS HAT For Raspberry Pi
R800C GSM/GPRS HAT For Raspberry Pi
R800C GSM/GPRS HAT For Raspberry Pi
R800C GSM/GPRS HAT For Raspberry Pi
R800C GSM/GPRS HAT For Raspberry Pi
R800C GSM/GPRS HAT For Raspberry Pi
R800C GSM/GPRS HAT For Raspberry Pi
R800C GSM/GPRS HAT For Raspberry Pi
₹​1,591.8
₹​1,349.0 + 18% GST
All Inclusive, Shipping Calculated at Checkout

B2B GST Credit Available

The R800C GSM/GPRS HAT is a handy, low power Raspberry Pi HAT which features multi-communication functionalities: GSM, GPRS, and phone call, applicable to countries or regions with 2G network coverage, up to 85.6kbps GPRS speed. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, and so on.


Features

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano
  • Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc.
  • UART interface, for connecting controller boards like Arduino/STM32
  • Onboard voltage translator, 3.3V by default, switch to 5V via jumper
  • 2x LED indicators, easy to monitor the working status
  • SIM card slot, supports 1.8V/3V SIM card
  • Baudrate: 2400bps ~ 115200bps (115200bps by default)
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • Supports SIM application toolkit: GSM 11.14 Release 99
  • Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)


Resources

User Manual


Specifications

GSM / GPRS / AUDIO
Frequency bandGSM: 850/900/1800/1900 MHz
Quad-band auto search
Compliant to GSM phase 2/2+
Emitting powerClass 4 (2W @ 900 MHz)
Class 1 (1W @ 1800 MHz)
GPRS connectivityGPRS multi-slot class 12/10 (default)
GPRS multi-slot class 1~12 (configurable)
GPRS data featureUL/DL speed: ≤85.6kbps
Supports Packet Broadcast Control Channel (PBCCH)
Coding schemes: CS-1, CS-2, CS-3, CS-4
Supports PAP (Password Authentication Protocol) for PPP connection
Supports Unstructured Supplementary Service Data (USSD)
SMSSupports: MT, MO, CB, Text, PDU
SMS storage: SIM card
AudioVoice encode/decode mode: Half Rate, Full Rate, Enhanced Full Rate, Adaptive Multi Rate
Support echo cancellation
Support noise reduction
OTHERS
Power supply5V
Logic level5V / 3.3V (default)
Operating temperature-40°C ~ 85°C
Storage temperature-45°C ~ 90°C
Dimensions30.2 x 65mm


Onboard Peripherals


  1. R800C module
  2. RT9193-33 power chip
  3. MIC29302 power chip
  4. TXS0108EPWR voltage translator
    translates 3.3V/5V into 1.8V
  5. Raspberry Pi GPIO Header
    for connecting with Raspberry Pi
  6. Operating voltage selection jumper
    VCC-3.3V: set operating voltage as 3.3V
    VCC-5V: set operating voltage as 5V
  7. PWR selection jumper
    PWR-P4: startup/shutdown by the Raspberry Pi P4 pin
  1. 3.5mm earphone/mic jack
  2. R800C control header
    for easily connecting with host boards like STM32
  3. GSM Antenna Connector
  4. SIM Card slot
  5. R800C power on/off
    Press for 1s to start up the R800C.
    Press for 1s to shutdown the R800C after booting
  6. NET Indicator
    Fast flashing when module starts, flashing slowly after GSM register succeed
  7. Power Indicator

Write a review

Note: HTML is not translated!
Bad Good