Menu
Your Cart

Ebyte E220-900T30D 868~915MHz 30dBm 10Km Long Distance LoRa Wireless Transmitter Module

Ebyte E220-900T30D 868~915MHz 30dBm 10Km Long Distance LoRa Wireless Transmitter Module
Ebyte E220-900T30D 868~915MHz 30dBm 10Km Long Distance LoRa Wireless Transmitter Module
Ebyte E220-900T30D 868~915MHz 30dBm 10Km Long Distance LoRa Wireless Transmitter Module
Ebyte E220-900T30D 868~915MHz 30dBm 10Km Long Distance LoRa Wireless Transmitter Module
Ebyte E220-900T30D 868~915MHz 30dBm 10Km Long Distance LoRa Wireless Transmitter Module
Ebyte E220-900T30D 868~915MHz 30dBm 10Km Long Distance LoRa Wireless Transmitter Module
Ebyte
Ebyte E220-900T30D 868~915MHz 30dBm 10Km Long Distance LoRa Wireless Transmitter Module
₹​1,049.00
₹​888.98 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 8
B2B GST Credit Available
Price in reward points: 888

Ebyte E220-900T30D 868~915MHz 30dBm 10Km Long Distance LoRa Wireless Transmitter Module

E220-900T30D adopts a new generation of LoRa spread spectrum technology and a wireless serial port module (UART) designed based on the LLCC68 chip scheme. It has a variety of transmission methods, works in the (850.125 ~ 930.125MHz) frequency band (default 873.125MHz), TTL level output, compatible with 3.3V and 5V IO port voltage.

E220-900T30D adopts a new generation of LoRa spread spectrum technology, supports air wake-up, carrier monitoring, communication key and other functions, supports sub-package length setting, and Ebyte provides customized development services. 


Datasheet


Features

  • The new LoRa spread spectrum modulation technology developed based on LLCC68, it brings a longer communicationdistanceand stronger anti-interference ability
  • Support users to set the communication key by themselves, and it cannot be read, which greatly improves the confidentialityofuser data
  • Support LBT function, monitor the channel environment noise before sending, which greatly improves the communicationsuccess rate of the module in harsh environments
  • Support RSSI signal strength indicator function for evaluating signal quality, improving communication network, and ranging
  • Support air wakeup, that is, ultra-low power consumption function, suitable for battery-powered applications
  • Support fixed-point transmission, broadcast transmission, channel monitoring
  • Support deep sleep, the power consumption of the whole machine is about 5uA in this mode
  • The module has built-in PA+LNA, and the communication distance can reach 10km under ideal conditions
  • The parameters are saved after power-off, and the module will work according to the set parameters after power-on
  • Efficient watchdog design, once an exception occurs, the module will automatically restart and continue to work accordingtotheprevious parameter settings
  • Support the data transmission rate of 2.4k~62.5kbps
  • Support 3.0~5.5V power supply, power supply greater than 5V can guarantee the best performance
  • Industrial standard design, supporting long-term use at -40~+85℃
  • SMA antenna interface


Specifications

  • IC :LLCC68
  • Frequency :850.125~930.125MHz
  • Power :30dBm
  • Distance :10km
  • Size :24*43mm
  • Operating Temperature : -40 to +85 ℃
  • Antenna : SMA-K 50 ohm impedance


Applications

  • Home security alarm and remote keyless entry
  • Smart home and industrial sensors
  • Wireless alarm security system
  • Building automation solutions
  • Wireless industrial-grade remote control
  • Health care products
  • Advanced Meter Reading Architecture(AMI)
  • Automotive industry application




Write a review

Note: HTML is not translated!
Bad Good
Captcha

Warranty Terms : 

Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.

Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.


What to take care of ?

Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.


Who pays the return shipping cost?

Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.


What voids warranty? 

Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.

If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement. 


Following items are not eligible for return under any circumstances 

  • Device Programmers / Dongles 
  • Soldering Consumables (Wire, Flux etc)