











This product qualifies for Free Surface Shipping !
B2B GST Credit Available
- Stock: 0 in Stock
- SKU: 07943
- Delivery Time
- Bulk & B2B RFQ
Elecrow ThinkNode G4 Wi-Fi HaLow Gateway Support Wi-Fi/Wi-Fi HaLow/Ethernet Connections | Supports AP/STA/Mesh, 850~950 MHz
Wi-Fi HaLow (based on the IEEE 802.11ah) is a low-power, long-range wireless communication technology designed by the Wi-Fi Alliance specifically for IoT scenarios. Compared to traditional Wi-Fi technology, it operates in the Sub-1 GHz unlicensed frequency band (mainly the 900MHz band). This frequency gives it stronger diffraction capabilities and penetration, enabling it to effectively penetrate buildings, vegetation, and other obstacles, thus overcoming the inherent limitations of traditional Wi-Fi in terms of coverage and environmental penetration.
The ThinkNode G4 Wi-Fi HaLow gateway is a long-range, high-speed wireless communication device designed for IoT applications. Based on IEEE 802.11ah (Wi-Fi HaLow) technology, it operates in the Sub-1GHz unlicensed frequency band. Theoretically, it can achieve a transmission distance of over 1 kilometer and supports data transmission rates up to 32 Mbps, perfectly filling the technological gaps of traditional Wi-Fi's short coverage and LoRa's low speeds.
The gateway is equipped with a high-performance MCU and advanced RF front-end, supporting dual-band design for both Wi-Fi HaLow and 2.4GHz Wi-Fi, and provides an Ethernet interface for flexible integration into existing network infrastructure. Configuration and OTA upgrades can be completed through a simple Web UI. It supports various networking methods such as AP, STA, and Mesh, and a single gateway can connect to a large number of devices, making it an ideal choice for smart manufacturing, smart cities, and smart agriculture scenarios.
Features
- Long-distance, high-speed transmission: Utilizing Wi-Fi HaLow technology, the theoretical line-of-sight distance can exceed 1 kilometer, maintaining a rate of 150 Kbps even at extreme distances, and reaching up to 32 Mbps at close range, balancing coverage and data throughput.
- Strong penetration and low power consumption: Operating in the Sub-1GHz band, it can effectively penetrate obstacles such as buildings and vegetation; its low-power design is suitable for long-term deployment in outdoor and industrial environments.
- Dual-band flexible networking: Supports dual-band design of Wi-Fi HaLow and 2.4GHz Wi-Fi, and is equipped with an Ethernet interface, supporting various networking methods such as AP, STA, and Mesh, flexibly adapting to the network architecture requirements of different scenarios.
- Massive device access: A single gateway can support a large number of terminal devices connecting simultaneously, with an access capacity more than 4 times that of traditional Wi-Fi access points, meeting the needs of large-scale IoT node deployment.
- Wide-temperature industrial-grade design: Operating temperature range of -20℃ to 70℃, adaptable to harsh outdoor and industrial environments, ensuring long-term stable operation of the device.
- Easy installation and maintenance: The lightweight and stylish wall-mounted design makes installation simple; it supports Web UI configuration and OTA remote upgrades, reducing on-site operation and maintenance costs.
Specifications
- CPU/SoC: HLK-7628N Module
- System memory: DDR2128MB
- Storage: 32MB
- WiFi HaLow Communication
- Chip: FGH100M
- WiFi Protocol: IEEE 802.11ah
- WiFi Band: 850~950 MHz
- Wifi Modulation Method: OFDM/ BPSK/ QPSK/ 16QAM/ 64QAM
- Encryption mode: AES, SHA-256, SHA-384, SHA-512, WPA3
- Work mode: AP/ STA / Mesh
- Physical layer maximum rate: 802.11ah: 32.5 Mbps
- Maximum output power: 21dbm
- Other Communication
- WiFi
- Supports 802.11 b/g/n protocols (2.4 GHz band), with a maximum speed of 300 Mbps.
- 802.11n: Maximum 150 Mbps (single stream), dual antennas combined to 300 Mbps.
- 802.11g: Maximum 54 Mbps.
- 802.11b: Maximum 11 Mbps.
- Ethernet: Up to 100 Mbps per port, supports switch functionality.
- Encryption Method: WEP64/128, TKIP, AES, WPA, WPA2, WAPI
- Hardware
- Interface: Type-C Interface, Ethernet Port, WiFi HaLow Antenna Interface, WiFi Antenna Interface
- CFG Button: Enter configuration mode / Restart gateway / Restore factory settings
- LED Indicator
- Power Indicator Light: Red. Indicates normal power-on status
- HaLow Indicator Light
- Blue
- When data transmission is in progress, the blue light remains constantly on.
- Other
- Power supply voltage: Typical 5.0 V-1A
- Installation Method: Wall-mounted screw holes (M2 screws)
- Operating Temperature: -20~70℃
- Storage Temperature: -20~70℃
- Relative Humidity: 10%~90%, non-condensing
- Size: 75*75*30mm (Exclude Antenna)
- Net Weight: 80g
Package Includes
- 1x ThinkNode G4 Wi-Fi HaLow Gateway

Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)




