Menu
Your Cart

ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor

ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
WaveShare Electronics
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
₹​3,349.00
₹​2,838.14 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 28
B2B GST Credit Available
Price in reward points: 2839

ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & Bluetooth, With Onboard Antenna

ESP32-S3-Touch-LCD-4.3 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, and integrates high-capacity Flash and PSRAM. Onboard 4.3-inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.


User Manual / Datasheet / Example Codes Etc.


Features

  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with an onboard antenna.
  • Built-in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash.
  • Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color.
  • Supports capacitive touch control via I2C interface, 5-point touch with interrupt support.
  • Onboard CAN, RS485, I2C interface, and TF card slot, integrate full-speed USB port.
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.


Package Includes 

  • 1x ESP32-S3-Touch-LCD-4.3
  • 2x HY2.0 2P to 2PIN male cable 10cm
  • 1x HY2.0 2P to 3PIN male cable 10cm
  • 1x HY2.0 2P to 4PIN male cable 10cm
  • 1x Standoff pack





Supports Multiple Peripherals

Supports The Expansion Of Multiple Peripherals Via Sensor, CAN, RS485, And I2C Interfaces



What's On Board


1 ESP32-S3N8R8

  • The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and Flash

2.  SGM2212-3.3

  • 800mA low-noise LDO

3.  FSUSB42UMX

  • for USB pins multiplexing

4.  Touch panel connector

5.  USB TO UART Type-C port

6.  USB Type-C port

7.  TJA1051T/3/1J

  • CAN interface chip

8.  CH422G

  • IO expansion chip

9.  BOOT button

  • Press and hold while powering on for program burning

10.  RESET button

11.  MP3302DJ-LF-Z

  • Screen backlight boost chip

12.  4.3inch display panel connector

13.  TF card slot

14.  Sensor header

15.  CAN header

16.  I2C header

17.  RS485 header

18.  3.7V single lithium battery PH2.0 header

19.  CAN terminal resistor selection

20.  RS485 terminal resistor selection

21.  CH343P

  • USB to UART chip

22.  SP3485

  • RS485 transceiver chip

23.  CS8501

  • Lithium battery recharge manager

24.  Status Indicators

  • PWR: Power supply indicator
  • CHG: Lithium battery charging indicator
  • DONE: Lithium battery charging completed indicator


Dimensions


Write a review

Note: HTML is not translated!
Bad Good
Captcha