ESP32-S3 2.8inch Capacitive Touch Round Display Development Board, 480×480, 32-bit LX7 Dual-core Processor, Supports WiFi & Bluetooth

ESP32-S3 2.8inch Capacitive Touch Round Display Development Board, 480×480, 32-bit LX7 Dual-core Processor, Supports WiFi & Bluetooth, ESP32 With Display

ESP32-S3-Touch-LCD-2.8C is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 2.8inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.

User Manual / Datasheet / Example Codes Etc.

Features

• Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.81 b/g/n) and Bluetooth 5 (LE), with onboard antenna
• Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
• Onboard 2.8inch capacitive touch display, 480×480 resolution
• Supports touch control via I2C interface, with interrupt support
• Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
• Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
• Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios 

Specification

• Display Panel: IPS
• Resolution: 480 × 480
• Communication Interface: RGB
• Touch Interface: I2C
• Display Size: 2.8 inch
• Contrast Ratio: 1200:1
• Driver IC: ST7701
• Touch IC: GT911

Package Includes

• ESP32-S3-Touch-LCD-2.8C x1
• SH1.0 12PIN cable ~100mm ×1
• SH1.0 4PIN cable ~100mm (2pcs) ×1

IPS Display Panel

Excellent display performance, 160° viewing angle

Supports multiple peripherals

Supports the expansion of multiple peripherals via GPIO, UART and I2C interfaces, etc.

What's On Board

Dimensions