ESP32-S3 1.85inch No-Touch Round Display Development Board, 360×360, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi & Bluetooth

ESP32-S3 1.85inch No-Touch Round Display Development Board, 360×360, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi & Bluetooth, ESP32 With Display

ESP32-S3-LCD-1.85 is a no-touch microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.

User Manual / Datasheet / Example Codes Etc.

Features

• Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
• Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
• Onboard 1.85inch LCD display, 360×360 resolution, 262K color
• Optional for capacitive touch function controled via I2C interface, with interrupt support
• Adapting UART, I2C and some IO interfaces
• Onboard audio decoder, Microphone, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
• Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

Specifications

• Size: 1.85inch 
• Resolution: 360x360
• Controller: ESP32-S3
• Interface: USB Type-C
• Touch Type: Without Touch

Package Includes

• 1x ESP32-S3-LCD-1.85
• 1x 2030 8Ω 2W speaker
• 2x SH1.0 4PIN cable ~100mm

IPS Display Panel

262K color, 360×360 resolution, wide viewing angle

Supports multiple peripherals

Supports the expansion of multiple peripherals via GPIO and I2C interfaces, etc.

What's On Board

Dimensions