Menu
Your Cart

Due to heavy rainfall and related logistics disruptions, store pickup will not be available on 7 July 2026. Online orders may also experience a delay of 1–2 days. We appreciate your understanding and patience.

Waveshare ESP32-S3 Development Board, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, With CNC Metal Case

Waveshare ESP32-S3 Development Board, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, With CNC Metal Case
Waveshare ESP32-S3 Development Board, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, With CNC Metal Case
Waveshare ESP32-S3 Development Board, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, With CNC Metal Case
Waveshare ESP32-S3 Development Board, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, With CNC Metal Case
Waveshare ESP32-S3 Development Board, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, With CNC Metal Case
Waveshare ESP32-S3 Development Board, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, With CNC Metal Case
Waveshare ESP32-S3 Development Board, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, With CNC Metal Case
Waveshare ESP32-S3 Development Board, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, With CNC Metal Case
Waveshare ESP32-S3 Development Board, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, With CNC Metal Case
Waveshare ESP32-S3 Development Board, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, With CNC Metal Case
WaveShare Electronics
Waveshare ESP32-S3 Development Board, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, With CNC Metal Case
₹​2,120.00
₹​1,796.61 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 18
B2B GST Credit Available
Price in reward points: 1796

ESP32-S3 Development Board, 32-Bit LX7 Dual-Core Processor, Integrates GC9A01 Display Driver Chip, With 1.28inch No-Touch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth, Round Display, With CNC Metal Case

ESP32-S3-LCD-1.28-B is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.28inch LCD display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it into products quickly. The board utilizes the ESP32-S3R2, an integrated system-on-chip (SoC) with low-power Wi-Fi and BLE5.0 capabilities. Additionally, it comes with an external 16MB Flash and 2MB PSRAM. 

The SoC includes hardware encryption accelerators, RNG (Random Number Generator), HMAC (Hash-based Message Authentication Code), and a Digital Signature module, meeting the security requirements of the Internet of Things (IoT). Its various low-power operating modes cater to power consumption needs in IoT, mobile devices, wearable electronics, smart homes, and other application scenarios.




Features

    • Equipped with Xtensa® 32-bit LX7 dual-core processor, up to 240MHz main frequency
    • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (BLE), with onboard antenna
    • Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory
    • Type-C connector, keeps it up to date, easier to use
    • Onboard 1.28inch LCD display, round IPS panel, 240×240 resolution, 65K color
    • Adopts CNC metal case with Acrylic dull-polish bottom plate
    • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture
    • Onboard 3.7V lithium battery recharge/discharge header and GPIO headers
    • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
    • Integrated with USB serial port full-speed controller, GPIO pins allow flexibly configuring pin functions






    CNC Metal Case





    30 × Multi-Function GPIO Pins



    What's On Board




    Dimensions



    Write a review

    Note: HTML is not translated!
    Bad Good
    Captcha

    Warranty Terms : 

    Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.

    Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.


    What to take care of ?

    Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.


    Who pays the return shipping cost?

    Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.


    What voids warranty? 

    Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.

    If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement. 


    Following items are not eligible for return under any circumstances 

    • Device Programmers / Dongles 
    • Soldering Consumables (Wire, Flux etc)