







B2B GST Credit Available
- Stock: 191 in Stock
- SKU: 25081
- Delivery Time
- Bulk & B2B RFQ
ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 - Without Pin Header
This is an ESP32-S3 Mini Development Board. The ESP32-S3 Mini Development Board board comes with ESP32-S3FH4R2 Dual-Core Processor & 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM, Which Support 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5.
User Manual / Datasheet / Example Codes Etc.
Board Specifications
- Equipped with Xtensa® 32-bit LX7 dual-core processor, up to 240MHz main frequency
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE)
- Built in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM
- Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards
- Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
- Integrated with USB serial port full-speed controller, 34 × GPIO pins allows flexibly configuring pin functions
- 4 × SPI, 2 × I2C, 3 × UART, 2 × I2S, 2 × ADC, etc.

Pin Definition

What's On Board

- ESP32-S3FH4R2 dual-core processor
up to 240MHz operating frequency - USB Type-C Port
- ME6217C33M5G
low dropout LDO, 800mA (Max) - WS2812 RGB LED
- 2.4G ceramic antenna
- BOOT button
Press it and then press the RESET button to enter download mode - RESET button
- ESP32-S3FH4R2 pins
Dimensions

Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)














