Menu
Your Cart

Delay in Shipments : We are experiencing delay in dispatches due to order backlogs after Diwali Holidays. Please allow 1-2 working days for order dispatch.  Store pickups are closed till 6th November. 

FLY PICO RP2040 Development Board with Header 4MB Flash

FLY PICO RP2040 Development Board with Header 4MB Flash
FLY PICO RP2040 Development Board with Header 4MB Flash
FLY PICO RP2040 Development Board with Header 4MB Flash
FLY PICO RP2040 Development Board with Header 4MB Flash
FLY PICO RP2040 Development Board with Header 4MB Flash
FLY PICO RP2040 Development Board with Header 4MB Flash
FLY PICO RP2040 Development Board with Header 4MB Flash
FLY PICO RP2040 Development Board with Header 4MB Flash
FLY PICO RP2040 Development Board with Header 4MB Flash
FLY PICO RP2040 Development Board with Header 4MB Flash
adiy
FLY PICO RP2040 Development Board with Header 4MB Flash
₹​324.00
₹​274.58 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 3
B2B GST Credit Available
Price in reward points: 275

FLY PICO RP2040 Development Board with Header 4MB Flash

This is an FLY PICO RP2040 Development Board with Header. ADIY FLY basic comes with a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and rich peripheral set augmented with a unique Programmable I/O (PIO) subsystem, RP2040 provides professional users with unrivalled power and flexibility. ADIY FLY pairs RP2040 with 4MB of Flash memory, and a power supply chip supporting input voltages from 3.3-5.5V. It provides 27 GPIO pins, 4 of which can function as analogue inputs, on 2.54mm-pitch through-hole pads.

RP2040 is manufactured on a modern 40nm process node, delivering high performance, low dynamic power consumption, and low leakage, with a variety of low-power modes to support extended-duration operation on battery power.


Specifications

  • Form factor : 21 mm × 51 mm
  • CPU : Dual-core Arm Cortex-M0+ @ 133MHz
  • Memory : 264KB on-chip SRAM; 4MB on-board Flash
  • Interfacing : 27 GPIO pins, including 4 analogue inputs
  • Input power : 3.3–5.5V DC
  • RESET button : Included

Peripherals :

  1. 2 × UART.
  2. 2 × SPI controllers
  3. 2 × I2C controllers
  4. 16 × PWM channels
  5. 1 × USB 1.1 controller and PHY, with host and Device support
  6. 8 × PIO state machines


Key Features

  • Pin to Pin as Compatible as Raspberry Pi Pico
  • With RESET Button
  • With 4MB FLASH memory
  • Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz
  • 264KB on-chip SRAM
  • DMA controller
  • Accelerated integer and floating-point libraries on-chip
  • Drag-and-drop programming using mass storage over USB
  • 2 on-chip PLLs to generate USB and core clocks
  • 27 GPIO pins, 4 of which can be used as analog inputs
  • 2×UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels
  • 1×USB 1.1 controller and PHY, with host and device support
  • Accurate on-chip clock, Temperature sensor
  • 8×Programmable I/O (PIO) state machines for custom peripheral support
  • High quality, low cost, high availability
  • Simple yet highly flexible power supply architecture
  • Various options for easily powering the unit from micro-USB, external supplies or batteries



Pin Diagram


Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: FLY , PICO , RP2040 , adiy