B2B GST Credit Available
- Stock: 0 in Stock
- SKU: 06481
- Delivery Time
- Bulk & B2B RFQ
ESP32 CAM USB Programmer With Auto Boot Function - Rev2.0
The cam-prog is a simple ESP32-Cam programmer that adds the missing USB programming capabilities to the widespread EPS32-based camera microcontroller. ESP32 CAM USB Programmer Rev2.0 implements also the boot mode selection overcoming the missing reset pin by cutting off power to the microcontroller. This simplifies the programming of the cam module significantly since no manual reset and boot mode selection is needed when using a common USB to the serial interface.
The cam-prog board uses the popular CH340 serial USB chip and includes the ability to program the ESP32-Cam from the Arduino IDE using the ESP32 board definitions — something that was missing from the ESP32-Cam at launch. This C Type of USB programmer works like a shield that you attach to the ESP32-CAM board. The programmer comes with a USB socket that you connect directly to your computer. This product is known as Ai-Thinker Cam Board programmer, ESP Cam Board Programmer, ESP32 Cam Programmer, ESP32 Camera Board Programmer, etc.
Note: ESP32 CAM Development Board is not included, Can be purchased separately.
Features & Specs
- Model: ESP32 CAM USB Programmer Rev2.0
- Serial Chip: CH340
- Button: Boot, EN/RST
- Interface: USB Programmer
- USB Connector: C Type
- Female Connector for ESP32 Cam Board
- On Board Power ON Led
- On Board RX Led
- Input Voltage: 5V
- Operating Temperature: -20~85°C
Package Includes
- 1 x ESP32 CAM USB Programmer
- 2 x 8 Pin Male Header
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)
