B2B GST Credit Available
- Stock: 0 in Stock
- SKU: 05435
- Delivery Time
- Bulk & B2B RFQ
LoRa6100Pro 1W, TTL, 868MHz, 6-8km, Long Range Wireless RF Mesh LoRa Module
The LoRa6100Pro-TTL-868 1W is a high-performance wireless communication module designed for long-range applications, featuring specifications tailored for extended-range communication in the 868MHz frequency band.
The LoRa6100Pro Operating in the 868MHz frequency band, the LoRa6100Pro-TTL-868 is optimized for long-range communication. With a range of 6-8 kilometers, it provides reliable and extended wireless connectivity suitable for a variety of applications.
LoRa Pro module is a new series of upgraded networking wireless communicationmodulesfrom Wireless. It is based on Semtech's SX127X chip and uses advanced LoRaspreadspectrum modulation frequency hopping technology to achieve high sensitivity. The penetrating power and communication distance are far superior to the current FSKandGFSK products, and have stronger anti-interference.
Features
- Transmission distance in the open area up to 8km @low rate
- Frequency band: 868MHz
- AES128 Data encryption method
- Node/route/node+route optional in MESH mode
- LBT (Listen Before Talk) function optional
- Hop level in MESH mode
- CRC encryption optional
- Built-in hardware reset protection circuit
- Diversified serial port parameters
- Up to 40 channels every Band
- LoRa modulation
- TTL Interface
- Sensitivity: -139 dBm
- Max output power: 500 mW/1W(+27/+30 dBm)
- Working voltage: 3.3 ~ 6.5 V
- Working temperature: -40 ~ +85 °C
Specifications
- Interface : TTL
- Network : MESH
- Frequency : 868MHz
- Modulation : LoRa
- Output Power : 1W
Applications
- Remote control
- Remote meter reading
- Industrial data collection
- Home automation telemetry
- Wireless data communication
- Access control system
Pin Defination
| Pin No. | Definition | Description |
| 1 | VCC | Connected to the positive power supply (typical 5V) |
| 2 | GND | Connected to ground |
| 3 | TXD/A | connect to A@485 |
| 4 | RXD/B | connect to B@485 |
| 5 | SET | Configuration parameter enable (low level enable parameter configuration, default high level output) |
| 6 | CS | Module enable pin (built-in pull-up) Note: Default factory version: sleep current <200uA, CS pulled high or suspended for normal communication, sleep at low level; Low power consumption version: sleep current <15uA, normal communication when CS is pulled low, pull high or float to sleep. |
