SIM7600E-H 4G Communication Module (B), Multi-band Support, Compatible with 4G/3G/2G, With GNSS Positioning

SIM7600E-H 4G Communication Module (B), Multi-band Support, Compatible with 4G/3G/2G, With GNSS Positioning

This is an SIM7600E-H 4G Communication Module, Multi-band Support, Compatible with 4G/3G/2G, With GNSS Positioning Module. The SIM7600E-H 4G Module Supports GPS, BeiDou, Glonass, GALILEO, QZSS, and LBS base station positioning and dial-up, telephone calls, SMS, TCP, UDP, MQTT, DTMF, HTTP, FTP, etc.

User Manual / Datasheet / Example Codes Etc.

Features

• Compatible with 2G/3G/4G network with global support.
• Supports dial-up, telephone calls, SMS, TCP, UDP, MQTT, DTMF, HTTP, FTP, etc.
• Supports GPS, BeiDou, Glonass, GALILEO, QZSS, and LBS base station positioning.
• Onboard USB and UART interface, for dial-up Internet access, cloud platform communication, GNSS positioning, etc.
• Castellated holes with immersion gold design, small size, easy to integrate into the device by soldering directly or inserting via the pin header.
• Adapting USB/UART/SIM card/GPIO control pins, easy to develop and debug, better expansibility.
• Built-in voltage translator, compatible with 3.3V/5V MCU motherboards such as STM32/ESP32/Arduino.
• Supports multiple power supply methods: USB port, VIN pin, and VBAT pin (for 3.7V lithium battery).
• Onboard multiple protection circuits: TVS protection for SIM card, power supply isolation between the USB port and pin header, VIN pin power supply anti-reverse, and so on, more safe and reliable.
• 2x LED indicators, easy to monitor the operating status.
• Adopts SIMCOM recommended power supply solution, supports 5~26V wide voltage power supply and 3A high current output, to prevent the module from dropping and restarting due to the large instantaneous power consumption, more stable and reliable in industrial use.
• Onboard Nano SIM card slot, supports 1.8V and 3V SIM cards, near the edge of the board design, for easy accessing SIM card.
• Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
• Adapting 3-ch antenna connector, IPEX antenna connector version and SMA connector version optional, supports mass customization.

Specifications

Operating Frequency

• LTE Cat-4 : LTE-FDD：B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66, LTE-TDD：B34/B38/B39/B40/B41
• 3G : UMTS/HSDPA/HSPA+：B1/B2/B4/B5/B6/B8/B19
• 2G : GSM/GPRS/EDGE：850/900/1800/1900 MHz
• GNSS : GPS/Beidou/GLONASS/GALILEO/QZSS
• GNSS Parameter
• Receiver ; 16-channel, C/A Code
• Sensity : -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (北斗)
• Cold starts: -148 dBm
• Time-To-First-Fix (open air) : Cold starts: <35s, Hot starts: <1s

Software Feature

• Network Protocol : TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS
• Internet Access : PPP/NDIS/RNDIS
• USB Driver : Windows XP/7/8/10/11, Linux (driver free on Raspberry Pi Raspbian system)
• SMS ; Supported types: MT, MO, CB, Text, PDU

Hardware Interface

• USB Interface : Can be used to access PC/Raspberry Pi/Jetson Nano and other hosts for 4G networking, positioning, AT command sending and receiving test, firmware upgrade, etc.
• UART Interface : Can be used to access MCU for 4G networking, positioning, AT command sending and receiving test, etc., compatible with 3.3V/5V working level.
• SIM Card Slot : Onboard Nano SIM card slot, adapting related pins, compatible with 1.8V and 3V SIM cards.
• Other Interfaces Adapting other common control pins such as GPIO, PWR, RST, FLT.
• Antenna Connectors : MAIN: 4G main antenna (optional SMA connector or IPEX 1 connector version), AUX: 4G auxiliary antenna (IPEX 1 connector by default, can be mass-customized as SMA connector) , GNSS: Positioning antenna (IPEX 1 connector by default, can be mass-customized as SMA connector).
• Indicator : PWR: Power indicator, NET: Network indicator

Other Parameters

• Power Supply : USB port or VBUS - GND pin: 5V power supply, VIN - GND pin : 5V~26V wide-range voltage power supply, BAT - GND pin : 3.7V lithium battery power supply
• Operating Voltage : 3.3V by default (configurable as 3.8V-5V via VIO pin by connecting external voltage)
• Operating Temperature : -30°C ~ 80°C
• Storage Temperature : -45°C ~ 90°C
• Dimensions : 38.8mm x 42mm

Package includes

• SIM7600X 4G Module pre-soldered version x1
• 4G antenna x1

Small And Easy Integration

Castellated Design, Small Size, High Integration Adapting Most Of The Common Interfaces, Easy To DIY And Embed Into The Device

Pinout Definition

Onboard Resources

Dimensions