B2B GST Credit Available
- Stock: 0 in Stock
- SKU: 02913
- Delivery Time
- Bulk & B2B RFQ
CPU
- Allwinner F1C100s, ARM 926EJS processor,up to 900MHz
Memory & storage
- 32MB DDR integrated into SoC, 16MB SPI Flash
- Onboard TF Slot, can be boot from TF Card,
Display
- 40-pin RGB LCD FPC connector supporting 272×480, 480×800, 1024×600 and other resolutions resistive displays(and capacitive displays trough the adapter board).
- Support 720P video output, support video stream decoding such as H.264 / MPEG
Communication Interface
- SDIO for WiFi module
- SPI x2, TWI x3, UART x3
- OTG USB x1, TV out
Other interface
- PWM x2, LRADC x1
- Headphone output x2, Mic x1
Electrical characteristics
- Input 5V via micro USB port, 3.3 to 5V via pin
- Output – 3.3V, selectable input RTC voltage
- Power Consumption – 54mA (idle) with Linux, 250mA with display
- Storage Temperature: -40~125°C; operating: -20 to 70°C
Software and development environment
- Support 3.10 BSP linux,
- Support 4.19 mainline linux,
- Support xboot bare metal development environment
- Support RT-Thread
Target application scenario
- IoT applications using more complex communication interfaces and protocols
- The application of human-computer interaction interface that needs more beautiful and complex logic
- Application scenarios that require more operations (as opposed to common MCUs)
- Need to use open source software under Linux for rapid development scenarios
- High-end geek players balance in size, performance and ease of use.
- Entry level player, software engineer, hardware diy using familiar language
Specifications
| Size and weight | |
| Core board size | 25.4x33.0mm |
| Core board weight | 4.2±0.2g |
| Precautions | |
| start up | Nano needs card boot (or solder SPI flash), only plug in USB without any phenomenon |
| System debug serial port | UART0, specific position reference pin diagram |
| USB interface | OTG usb, power and communication |
| Operating temperature | -20~70℃ |
| Part List | |
| Lichee Nano | x1 |
| WiFi Module | x1 |
| OTG | x1 |
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)
