B2B GST Credit Available
- Stock: 0 in Stock
- SKU: 04235
- Delivery Time
- Bulk & B2B RFQ
Sipeed OV2640 Binocular Camera Module Stereo Vision Depth Vision
This is a Sipeed OV2640 Binocular Camera Module Stereo Vision Depth Vision. Based on the OV2640 camera, the binocular camera switches display, the pin is compatible with the standard 24P camera, and can be directly connected through the 24P FPC cable.
The binocular distance is 60mm, which is close to the real body distance of the human body. It can be used for deep visual research. MaixPy provides a binocular operation interface.
Features
- Image Sensor (Dual) : OV2640
- Image Resolution : 2MP | 1632x1232 (1600x1200 UXGA)
- Interface : Serial Camera Control Bus (SCCB)
- Connection Port(s) : 3 x 24P FPC Connectors
- Lens Size : 1/4”
- Binocular Distance : 60mm (Between Camera Sensor Centres)
- Chief Ray Angle : 25° Non-Linear
- Image Format Support : – UXGA | SXGA | SVGA
- Image Sensor Sensitivity : – 0.6V/Lux-sec
- Signal to Noise Ratio : – 40dB
- Operating Voltage : – 2.5V to 3V DC
- Operating Temperatures : – 0° to +50°C for Stable Image
Output Format Support
- RWA RGB | RGB (565/555) | GRB442
- YUV (422/420) | YCbCr (4:2:2)
- 8-bit Compressed Data
- 8/10-bit Raw RGB Data
Integrated Features
- Exposure, Gain & Gamma Control
- White Balancing & Black-Level Calibration
- Colour Saturation & Hue Control
- Edge Enhancement & Lens Correction
- White Pixel & Noise Cancelling
- VarioPixel Sub-Sampling
- 50/60Hz Luminance Detection
- Zooming, Panning & Windowing Functions
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)
