B2B GST Credit Available
- Stock: 10 in Stock
- SKU: 24655
- Delivery Time
- Bulk & B2B RFQ
- HSN Code: 84733099
SX1262 433/470MHz LoRaWAN Node Module Expansion Board for Raspberry Pi, With Magnetic CB antenna - Basic Version
This series of products are LoRa modules using the new generation of SX1262 RF chip, with the features of long communication distance and strong anti-interference ability. Suitable for Sub-GHz frequency band network, and is available in LF (410~510MHz) or HF (850~930MHz) frequency band versions. Combined with a LoRa gateway, it can be connected to servers such as TTN to build a LoRaWAN network. In addition to the basic LoRaWAN version, it also provides optional GNSS positioning function with GPS/BD support.
This is without GNSS version, if you are looking for the with GNSS version, please click here
User Manual / Datasheet / Example Codes Etc.
Features
- Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi series boards
- The new generation SX1262 has higher power efficiency and longer transmission distance than the SX1278
- Suitable for Sub-GHz band, combined with the gateway, can be quickly connected to a cloud server such as TTN to build a LoRaWAN network
Specifications
- RF CHIP : SX1262
- FREQUENCY BAND : LF: 410 ~ 510MHz / HF: 850 ~ 930MHz
- MODULATION : LoRa / (G)FSK
- DATA RATE : LoRa: 0.018 ~ 62.5Kbps / (G)FSK: 0.6 ~ 300Kbps
- EMIT POWER : [email protected]
- SPREADING FACTOR : SF7 ~ SF12
- OPERATING VOLTAGE : 3.3V
- MODULE CURRENT CONSUMPTION : emitting current: 107mA@22dBm / receiving current: 5.3mA@125KHz
- COMMUNICATION BUS : SPI
- OPERATING TEMPERATURE : 0 ~ 50℃
- INTERFACE : 40PIN GPIO header
Package Includes
- SX1262 433/470M LoRaWAN HAT x1
- 433/470M Magnetic CB antenna x1
- IPEX to SMA adapter cable ~17cm x1
- Screws pack x1
- 2×20PIN female pinheader x1
Pinout Definition
What's On Board
- SX1262
LoRa module - L76K
GNSS module - Power chip
5V to 3.3V LDO - GPS STANDY mode ON/OFF
OFF: turn off STANDY and GPS works normally
ON: turn on STANDY, GPS stops outputting NMEA - SET button
Press to wake up the GNSS module in sleep mode
- GNSS module IPEX 1 connector
L76K antenna connector - LoRa module IPEX 1 connector
LoRa antenna connector - Status Indicator
PWR: power indicator
RXD/TXD: UART RX/TX indicator
PPS: GPS status indicator - Raspberry Pi 40PIN GPIO header
for connecting with Raspberry Pi series boards - LoRa module and GNSS module pin header
Dimensions
