WiZnet W55RP20-EVB-Pico RP2040 & W5500 Based Evaluation Board

WiZnet W55RP20-EVB-Pico RP2040 & W5500 Based Evaluation Board

W55RP20-EVB-Pico is an evaluation board for W55RP20, a chip that combines W5500, a wired TCP/IP controller, and RP2040. Therefore, both the functions of Raspberry Pi Pico and those of the W5500 are available.

• Raspberry Pi Pico Clone
• Ethernet (W55RP20 Hardwired TCP/IP CHIP)

Datasheet

Features

• W55RP20 microcontroller
• Internal 2MByte Flash
• Dual-core cortex M0+ at up to 133MHz
• 264kByte multi-bank high performance SRAM
• External Quad-SPI Flash with eXecute In Place (XIP)
• High performance full-crossbar bus fabric
• 22 multi-function General Purpose IO (4 can be used for ADC)

• 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V)

• 12-bit 500ksps Analogue to Digital Converter (ADC)
• Various digital peripherals

• 2 × UART, 2 × I2C, 2 × I2C, 2 × SPI, 16 × PWM channels
• 1 × Timer with 4 alarms, 1 × Real Time Counter

• 2 × Programmable IO (PIO) blocks, 8 state machines total
• Flexible, user-programmable high-speed IO
• Can emulate interfaces such as SD Card and VGA
• Supports Hardwired Internet Protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
• Supports 8 Independent Hardware SOCKETs simultaneously
• Internal 32 Kbytes Memory for TX/ RX Buffers
• Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)

• USB C port for power and data (and for reprogramming the Flash)
• 3-pin ARM Serial Wire Debug (SWD) port
• 10 / 100 Ethernet PHY embedded
• Supports Auto Negotiation

• Full / Half Duplex
• 10 / 100 Based
• Built-in RJ45 (POE)
• Built-in DCDC (PWM/PFM)
• Additional modules are installed to enable POE

Package Includes

• 1x WiZnet W55RP20-EVB-Pico RP2040 & W5500 Based Evaluation Board